Dell Alienware m15 R3 Service Manual - Page 35
Speakers, Removing the speakers
View all Dell Alienware m15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
NOTE: Ensure that you connect the G-sensor cable before you connect the display cable. 9. Connect the display cable to the connector on the system board and close the latch. 10. Route the antenna cables to the routing guides on the left fan and system board. 11. Adhere the tapes that secure the antenna cables to system board and left fan. 12. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Main (white triangle) Antenna-cable color White Auxiliary (black triangle) Black 13. Place the wireless card bracket on the wireless card. 14. Replace the screw (M2x3) that secures the wireless card bracket to the left I/O-board. 15. Adhere the Mylar over the system board. Next steps 1. Install the rear IO-cover. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure. 35