Dell Alienware m15 R3 Service Manual - Page 48
left I/O-board, NOTE: Ensure that you connect the G-sensor cable before you connect the display cable.
View all Dell Alienware m15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Steps 1. Install the fan and heat-sink assembly. 2. Install the left I/O-board. 3. Turn the system-board assembly over and place the system-board assembly on the palm-rest assembly. NOTE: When the system board is installed it is removed as an assembly consisting of: • system board • left I/O-board • fan and heat-sink assembly 4. Align the screw holes on the system board with the screw holes on the palm-rest assembly. 5. Replace the two (M2x3) screws that secure the left I/O-board to the palm-rest assembly. 6. Replace the eight (M2x3) screws that secure the system board to the palm-rest assembly. 7. Replace the three (M2x3) screws that secure the fan and heat-sink assembly to the palm-rest assembly. 8. Replace the two (M2x4.5) screws that secure the fan and heat-sink assembly to the palm-rest assembly. 9. Connect the G-sensor cable to the connector on the system board. NOTE: Ensure that you connect the G-sensor cable before you connect the display cable. 10. Connect the Tobii eye tracker cable to the connector on the system board. 48