Dell Alienware m15 R3 Service Manual - Page 26
Rear-I/O cover, Removing the rear I/O-cover
View all Dell Alienware m15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. Align the notch on the M.2 2230 WWAN/solid-state drive with the tab on the M.2 card slot on the left I/O-board. 2. Slide the M.2 2230 WWAN/solid-state drive into the M.2 card slot on the left I/O-board. 3. Place the M.2 2230 thermal shield on the M.2 2230 WWAN/solid-state drive. 4. Align the screw hole on the M.2 2230 thermal shield with the screw hole on the left I/O-board. 5. Replace the screw (M2x2.5) that secures the M.2 2230 WWAN/solid-state drive and thermal shield to the left I/O-board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Rear-I/O cover Removing the rear I/O-cover Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the rear I/O-cover and provides a visual representation of the removal procedure. 26