Dell Alienware m15 R3 Service Manual - Page 57
Power-button assembly, Removing the power-button assembly
View all Dell Alienware m15 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Steps 1. Place the power-adapter port into the slot on the palm-rest assembly. 2. Place the power-adapter port bracket on the power-adapter port. 3. Align the screw holes on the power-adapter port bracket to the screw holes on the palm-rest assembly. 4. Replace the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly. Next steps 1. Follow the procedure from step 3 to step 24 in Installing the system board. 2. Install the right IO-board. 3. Install the rear IO-cover. 4. Install the M.2 2230 solid-state drive. (if applicable) 5. Install the M.2 2280 solid-state drive. (if applicable) 6. Install the battery. 7. Install the base cover. 8. Follow the procedure in After working inside your computer. Power-button assembly Removing the power-button assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the M.2 2230 solid-state drive. (if applicable) 5. Remove the M.2 2280 solid-state drive. (if applicable) 6. Remove the rear IO-cover. 7. Remove the right IO-board. 8. Follow the procedure from step 1 to step 19 in Removing the system board. 57