Dell Inspiron 3030 Desktop Owners Manual - Page 62
Installing the power-supply unit, Steps
View all Dell Inspiron 3030 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Figure 37. Installing the power-supply unit Steps 1. Place and slide the tabs on the power-supply unit into the latches on the chassis. 2. Align the screw holes on the power-supply unit to the screw holes on the chassis. 3. Replace the three screws (#6-32) that secure the power-supply unit to the chassis. 4. Route the power-supply unit cables through the routing guides on the chassis. 5. Connect the system-board power cable to the system board. 6. Connect the processor-power cable to the system board. 7. Connect the graphics-card power cable to the graphics card. 8. Place the computer in an upright position. 62 Removing and installing Customer Replaceable Units (CRUs)
Figure 37. Installing the power-supply unit
Steps
1.
Place and slide the tabs on the power-supply unit into the latches on the chassis.
2.
Align the screw holes on the power-supply unit to the screw holes on the chassis.
3.
Replace the three screws (#6-32) that secure the power-supply unit to the chassis.
4.
Route the power-supply unit cables through the routing guides on the chassis.
5.
Connect the system-board power cable to the system board.
6.
Connect the processor-power cable to the system board.
7.
Connect the graphics-card power cable to the graphics card.
8.
Place the computer in an upright position.
62
Removing and installing Customer Replaceable Units (CRUs)