Dell Inspiron 3030 Desktop Owners Manual - Page 75

Steps, Next steps, Installing the system board

Get Dell Inspiron 3030 Desktop PDF manuals and user guides View all Dell Inspiron 3030 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Figure 48. Installing the system board Steps 1. Slide the front I/O-ports on the system board into the front I/O-slots on the chassis. 2. Align the screw holes on the system board with the screw holes on the chassis. 3. Replace the eight screws (6-32) that secure the system board to the chassis. 4. Route and connect all the cables that you disconnected from the system board. ● processor-power cable ● system-board power cable ● optical-drive data cable ● optical-drive power cable 5. Place and align the front I/O-bracket with the I/O slot on the chassis. 6. Replace the two screws (6-32) that secure the front I/O-bracket to the chassis. Next steps 1. Install the processor. 2. Install the processor fan and heat-sink assembly. 3. Install the fan shroud. 4. Install the media-card reader. Removing and installing Field Replaceable Units (FRUs) 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Figure 48. Installing the system board
Steps
1.
Slide the front I/O-ports on the system board into the front I/O-slots on the chassis.
2.
Align the screw holes on the system board with the screw holes on the chassis.
3.
Replace the eight screws (6-32) that secure the system board to the chassis.
4.
Route and connect all the cables that you disconnected from the system board.
●
processor-power cable
●
system-board power cable
●
optical-drive data cable
●
optical-drive power cable
5.
Place and align the front I/O-bracket with the I/O slot on the chassis.
6.
Replace the two screws (6-32) that secure the front I/O-bracket to the chassis.
Next steps
1.
Install the
processor
.
2.
Install the
processor fan and heat-sink assembly
.
3.
Install the
fan shroud
.
4.
Install the
media-card reader
.
Removing and installing Field Replaceable Units (FRUs)
75