Dell Inspiron 3030 Desktop Owners Manual - Page 69
Processor, Removing the processor
View all Dell Inspiron 3030 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Next steps 1. Install the fan shroud. 2. Install the left-side cover. 3. Follow the procedure in After working inside your computer. Processor Removing the processor CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 3. Remove the fan shroud. 4. Remove the processor fan and heat-sink assembly. About this task WARNING: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. The following image indicates the location of the processor and provides a visual representation of the removal procedure. Figure 42. Removing the processor Steps 1. Press the release lever down and then push it away from the processor to release it from the securing tab. 2. Extend the release lever completely and open the processor cover. CAUTION: When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket. 3. Gently lift the processor from the processor socket. Removing and installing Field Replaceable Units (FRUs) 69