Dell Inspiron 3030 Small Desktop Owners Manual - Page 82
Table 27. System setup options-Integrated Devices menu continued
View all Dell Inspiron 3030 Small Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table 27. System setup options-Integrated Devices menu (continued) Integrated Devices NOTE: Depending on the configuration ordered, the microphone setup option may not be available. USB Configuration Enable USB Boot Support Enables booting from USB mass storage devices that are connected to external USB ports. By default Front USB Ports is selected. By default, Enable Rear USB Ports is selected. By default, Enable USB Boot Support is selected. Front USB Configuration Enables or disables individual USB ports. If a USB port is enabled, devices attached to this port and enabled for the OS. If the USB port is disabled, the OS can't see any devices attached to this port. By default, Front Port 1 (Bottom Left)* is selected. By default, Front Port 2 (Bottom Right)* is selected. By default, Front Port 3 (Top Left) is selected. By default, Front Port 4 (Top Right) is selected. * Denotes a USB 3.0-capable port NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of this setting. Rear USB Configuration Enables or disables individual USB ports. If a USB port is enabled, devices attached to this port and enabled for the OS. If the USB port is disabled, the OS can't see any devices attached to this port. By default, Front Port 1 (Bottom Left) is selected. By default, Front Port 2 (Bottom Right) is selected. By default, Front Port 3 (Top Left)* is selected. By default, Front Port 4 (Top Right)* is selected. * Denotes a USB 3.0-capable port NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of this setting. Table 28. System setup options-Storage menu Storage SATA/NVMe Operation SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller. By default, the RAID On option is selected. The storage device is configured to support RAID functions with VMD Controller. Storage Interface Port Enablement Displays the information of various onboard drives. Enables or disables the on board drives. By default, SATA-0 is selected. By default, SATA-3 is selected. By default, M.2 PCIe SDD-0 is selected. 82 BIOS Setup