Dell Inspiron 530 Service Manual - Page 12

Back to Contents Page Display Assembly Dell™ Latitude™ D530 Service Manual Removing the Display Assembly Removing the Display Bezel Replacing the Display Bezel Display Panel Display Latch Removing the Display Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer. 1. Follow the instructions in Before Working Inside Your Computer. 2. Remove the hinge cover (see Hinge Cover). 3. Remove the keyboard (see Keyboard). 4. Remove the captive screw that grounds the display cable. 5. Disconnect the display cable from the display cable connector on the system board. 6. Disconnect the three Mini-Card antenna cables (see Mini-Card). 7. Disconnect the antenna cables from the display by holding the two gold antenna connectors on each connector and gently pulling them apart. 1 M2.5 x 5-mm screws (4) 2 display cable grounding-wire screw 3 display cable pull-tab 4 display connector on system board 5 antenna cable connectors (3) 8. Remove the four M2.5 x 5-mm screws from the display and remove the display from the computer. Replacing the Display Assembly