Dell Inspiron One 2020 Specifications (SWF/PDF) - Page 26
Replacing the Optical Drive - connections
View all Dell Inspiron One 2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 Carefully pry the optical-drive bezel and remove it from the optical-drive assembly. 5 Remove the screws that secure the optical-drive bracket to the optical drive. 6 Remove the optical-drive bracket. 4 3 1 2 1 optical-drive bezel 3 optical-drive bracket 2 optical drive 4 screws (2) Replacing the Optical Drive Procedure 1 Align the screw holes on the optical-drive bracket with the screw holes on the optical drive. 2 Replace the screws that secure the optical-drive bracket to the optical drive. 3 Align the tabs on the optical-drive bezel with the slots on the optical-drive assembly and snap the optical-drive bezel into place. 4 Slide the optical-drive assembly into the optical-drive bay until it is fully seated. 5 Replace the screw that secures the optical-drive assembly to the chassis. 6 Connect the power and data cable to the connector on the optical-drive assembly. Postrequisites 1 Replace the back cover. See "Replacing the Back Cover" on page 20. 2 Replace the stand. See "Replacing the Stand" on page 18. 3 Replace the stand cover. See "Replacing the Stand Cover" on page 16. 4 Follow the instructions in "After Working Inside Your Computer" on page 13. 26 | Optical Drive