Dell Inspiron One 2020 Specifications (SWF/PDF) - Page 36
Replacing the System-Board Shield - to tv
View all Dell Inspiron One 2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3 Disconnect the antenna-in connector cable from the connector on the TV-tuner card. 4 Remove the antenna-in connector. See "Removing the Antenna-In Connector" on page 37. 3 2 1 1 system-board shield 3 TV-tuner card 2 antenna-in connector cable Replacing the System-Board Shield Procedure 1 Replace the antenna-in connector. See "Replacing the Antenna-In Connector" on page 38. 2 Connect the antenna-in connector cable to the connector on the TV-tuner card. 3 Turn the system-board shield over and align the screw holes on the system-board shield with the screw holes on the chassis. 4 Replace the screws that secure the system-board shield to the chassis. Postrequisites 1 Replace the back cover. See "Replacing the Back Cover" on page 20. 2 Replace the stand. See "Replacing the Stand" on page 18. 3 Replace the stand cover. See "Replacing the Stand Cover" on page 16. 4 Follow the instructions in "After Working Inside Your Computer" on page 13. 36 | System-Board Shield