Dell Inspiron One 2020 Specifications (SWF/PDF) - Page 59
Replacing the Power-Button Assembly - replace hard drive
View all Dell Inspiron One 2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Replacing the Power-Button Assembly Procedure 1 Place the power-button assembly on the middle frame and then slide it toward the bottom of the computer. Ensure that the slot on the power-button assembly is secured under the tab on the middle frame. 2 Align the screw hole on the power-button assembly with the screw hole on the middle frame. 3 Replace the screw that secures the power-button assembly to the middle frame. 4 Route the power-button and hard-drive activity light cable through the routing guides. 5 Connect the power-button and hard-drive activity light cable to the connector (PWRCN1) on the system board. Postrequisites 1 Replace the system-board shield. See "Replacing the System-Board Shield" on page 36. 2 Replace the back cover. See "Replacing the Back Cover" on page 20. 3 Replace the stand. See "Replacing the Stand" on page 18. 4 Replace the stand cover. See "Replacing the Stand Cover" on page 16. 5 Follow the instructions in "After Working Inside Your Computer" on page 13. Power-Button Assembly | 59