Dell Inspiron One 2020 Specifications (SWF/PDF) - Page 63
Replacing the Processor Heat-Sink
View all Dell Inspiron One 2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Replacing the Processor Heat-Sink CAUTION: Incorrect alignment of the processor heat-sink can cause damage to the system board and processor. Procedure 1 Clean the thermal grease from the bottom of the processor heat-sink and reapply it. NOTE: The original thermal grease can be reused if the original processor and processor heat-sink are reinstalled together. If either the processor or the processor heat-sink is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is achieved. 2 Align the captive screws on the processor heat-sink with the screw holes on the system board. 3 In sequential order (indicated on the processor heat-sink), tighten the captive screws that secure the processor heat-sink to the system board. Postrequisites 1 Replace the system-board shield. See "Replacing the System-Board Shield" on page 36. 2 Replace the back cover. See "Replacing the Back Cover" on page 20. 3 Replace the stand. See "Replacing the Stand" on page 18. 4 Replace the stand cover. See "Replacing the Stand Cover" on page 16. 5 Follow the instructions in "After Working Inside Your Computer" on page 13. Processor Heat-Sink | 63