Dell Latitude 7220 Rugged Extreme Tablet Service Manual - Page 13

Removing and installing components, Recommended tools, Screw list - drivers

Page 13 highlights

3 Removing and installing components Recommended tools The procedures in this document require the following tools: • Phillips #0 screwdriver • Phillips #1 screwdriver • Philips #2 screwdriver • Plastic scribe NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4. Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component LCD Screw type M2.5x5 Quantity 19 Screw image Heat sink M2x5 1 M2x3 3 System fan M2x5 4 Solid-state drive (SSD) M2x3 1 M.2 WLAN M2x3 1 M.2 WWAN M2x3 1 Microphone M2x5 1 Front camera M2x3 1 Removing and installing components 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

Removing and installing components
Recommended tools
The procedures in this document require the following tools:
Phillips #0 screwdriver
Phillips #1 screwdriver
Philips #2 screwdriver
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4.
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Screw type
Quantity
Screw image
LCD
M2.5x5
19
Heat sink
M2x5
M2x3
1
3
System fan
M2x5
4
Solid-state drive (SSD)
M2x3
1
M.2 WLAN
M2x3
1
M.2 WWAN
M2x3
1
Microphone
M2x5
1
Front camera
M2x3
1
3
Removing and installing components
13