Dell Latitude 7220 Rugged Extreme Tablet Service Manual - Page 16

Subscriber Identification Module (SIM) card, Removing the uSIM

Page 16 highlights

Steps 1. Align the pins on the battery with the connector on the tablet. NOTE: Ensure that the metal pin of the battery is aligned in place. 2. Place the battery into the battery bay until it clicks into place. 3. Slide the battery latch to the locked state. 4. Ensure that the battery release latch is in the locked state. Next steps 1. Follow the procedure in after working inside your tablet. Subscriber Identification Module (SIM) card Removing the uSIM Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the batteries. 16 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87

Steps
1.
Align the pins on the battery with the connector on the tablet.
NOTE:
Ensure that the metal pin of the battery is aligned in place.
2.
Place the battery into the battery bay until it clicks into place.
3.
Slide the battery latch to the locked state.
4.
Ensure that the battery release latch is in the locked state.
Next steps
1.
Follow the procedure in
after working inside your tablet
.
Subscriber Identification Module (SIM) card
Removing the uSIM
Prerequisites
1.
Follow the procedure in
before working inside your tablet
.
2.
Remove the
batteries
.
16
Removing and installing components