Dell Latitude 7220 Rugged Extreme Tablet Service Manual - Page 47
System board, Removing the system board
View all Dell Latitude 7220 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps 1. Adhere the coin-cell battery to the slot on the system board. 2. Place the fingerprint cable and microSD card cable on the coin-cell battery. 3. Connect the coin-cell battery cable to the connector on the system board. Next steps 1. Install the display assembly. 2. Install the batteries. 3. Follow the procedure in after working inside your tablet. System board Removing the system board Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the batteries. 3. Remove the display assembly. Removing and installing components 47
Steps
1.
Adhere the coin-cell battery to the slot on the system board.
2.
Place the fingerprint cable and microSD card cable on the coin-cell battery.
3.
Connect the coin-cell battery cable to the connector on the system board.
Next steps
1.
Install the
display assembly
.
2.
Install the
batteries
.
3.
Follow the procedure in
after working inside your tablet
.
System board
Removing the system board
Prerequisites
1.
Follow the procedure in
before working inside your tablet
.
2.
Remove the
batteries
.
3.
Remove the
display assembly
.
Removing and installing components
47