Dell OptiPlex FX160 Dell™ OptiPlex™ FX160 Re-Imaging Guide
Dell OptiPlex FX160 Manual
View all Dell OptiPlex FX160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell OptiPlex FX160 manual content summary:
- Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 1
Dell™ OptiPlex™ FX160 Re-Imaging Guide Model DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 2
of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable. Information in this - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 3
™ OptiPlex™ FX160 Re-Imaging Guide The Dell OptiPlex FX160 computer with an internal flash card hard drive is preloaded with either a Microsoft® Windows® XP Embedded or SUSE® Linux Enterprise Thin Client (SLETC) operating system. However, when system updates are released, or special configurations - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 4
to create a bootable Windows PE RAM disk on a UFD device. With Windows PE RAM a computer can be restarted for deployment or recovery. NOTE: Ensure that you have sufficient memory to support the size of your Windows PE image and any additional applications. 4 Dell OptiPlex FX160 Re-Imaging Guide - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 5
the necessary tools. By default, all tools are installed at C:\Program Files\\Tools, where can be Windows OPK or Windows AIK. 3 At the \mount\windows\system32\ directory: winpeshl.ini DellImageDeploy.exe Comctl32.dll Oledlg.dll Wimgapi.dll Dell OptiPlex FX160 Re-Imaging Guide 5 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 6
UFD as a single FAT32 drive. The following example assumes the UFD is disk 1. Open a command window and enter the following: diskpart select disk 1 clean create partition primary size= select partition 1 active format fs=fat32 assign exit 6 Dell OptiPlex FX160 Re-Imaging Guide - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 7
FX160 Computer With a UFD Device CAUTION: Re-imaging your FX160 computer will erase all data from the hard drive or flash card. Back up your system to an external device before re-imaging your computer. 1 Power off the FX160 computer. 2 Plug the UFD device with the bootable Windows XP Embedded image - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 8
either a Linux or Windows computer system. After the FX160 computer is booted to the USB flash drive, the Thin Client Imaging utility is used to copy SLETC to the FX160 flash card (hard drive). The minimum size for the USB flash drive is 512MB. Create a Linux Bootable USB Flash Drive With Linux The - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 9
USB Flash Drive With Windows The update CD provided includes these three files: • Documentation (*.pdf) • SLETC update file (*.raw). The name of this file reflects the revision level of SLETC. • Windows USB flash drive image installer (USBDiskImageTool.exe) Dell OptiPlex FX160 Re-Imaging Guide 9 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 10
power off the computer. 2 Insert the bootable flash drive with the SLETC image into a USB port. 3 Power on the FX160 computer. 4 When the BIOS window options list appears (in the upper right-corner of the screen) press to access the Boot Device menu. 10 Dell OptiPlex FX160 Re-Imaging Guide - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 11
a Click More Applications. b Click Thin Client Image. 7 In the Thin Client Image window: a Find the Target pull-down menu and select Hard Drive. CAUTION: When the disk image is being written, do not perform other operations with your computer. b Click and hold the Install Image button for one second - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 12
12 Dell OptiPlex FX160 Re-Imaging Guide - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 13
Dell™ OptiPlex™ FX160 型号 DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 14
Dell™ n Microsoft® Windows 2008 Dell Inc Dell Inc Dell、 DELL 徽标和 OptiPlex 是 Dell Inc Microsoft、 Windows、 Windows Vista 和 Windows Vista Microsoft Corporation Dell Inc 型号 DC01T 2008 年 8 月 P/N H310K 修订版 A01 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 15
Dell™ OptiPlex™ FX160 Dell OptiPlex FX160 Microsoft® Windows® XP Embedded 或 SUSE® Linux Enterprise Thin Client (SLETC FX160 Microsoft Windows 的 FX160 对于 FX160 嵌入式 Windows XP DVD DVD 引导 FX160 FX160 Microsoft Windows WAIK) 软件的 Windows DVD USB USB FX160 FX160 使用 DVD FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 16
a Custom Windows PE Image Windows PE WAIK 1 Microsoft WAIK 1GB)。 2 单击 Start All Programs Windows OPK 或 Windows AIK Windows PE Tools Command Prompt (Windows PE C:\Program Files\\Tools version> 可以是 Windows OPK Windows AIK。 3 copype.cmd x86 16 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 17
prep peimg /prep c:\winpe_x86\mount\Windows 7 使用 ImageX /unmount 选项和 /commit Winpe.wim): imagex /unmount c:\winpe_x86\mount /commit 8 将 \winpe_x86\ISO Boot.wim Boot.wim UFD 9 准备 UFD Diskpart 在 Windows Vista 或 Windows PE UFD。 a 在 Windows Vista Windows PE UFD 设备。 Dell OptiPlex FX160 17 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 18
iso\*.* /s /e /f f:\ 其中, c f 代表 UFD 设备。 11 将 UFD 使用 UFD 设备对 FX160 Windows FX160 1 关闭 FX160 2 Windows XP UFD USB 端口。 3 打开 FX160 BIOS 按 访问 Boot Menu 4 在 Boot Device 嵌入式 Windows XP UFD Enter> 键。 Windows PE Windows XP 5 FX160 Capture System Image 18 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 19
Install System Image Install 7 使用 SUSE Linux Enterprise Thin Client 对 FX160 CD 以及 Linux 或 Windows USB SLETC FX160 FX160 USB Thin Client SLETC 复制到 FX160 USB 512MB。 使用 Linux 创建 Linux 可引导 USB CD pdf)。 • SLETC raw SLETC 的修订 Windows USB USBDiskImageTool.exe USB UFD Linux - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 20
是 CD-ROM 中 SLETC media/Novell_SLETC_for_Dell/Novell-SLETC-10SP2-1-for-Dell.raw), 是 USB 8 USB Linux FX160 21 USB FX160 SLETC 使用 Windows 创建 Linux 可引导 USB CD pdf) • SLETC raw SLETC 的修订 Windows USB USBDiskImageTool.exe) 20 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 21
(选择 USB USB 6 单击 Write Disk Image Write Verify USB 7 Disk was imaged successfully Close 8 将 USB CD 从 Windows 使用 USB FX160 SLETC FX160 1 2 将包含 SLETC USB 端口。 3 打开 FX160 4 BIOS F12> 访问 Boot Device Menu 5 在 Boot Device SLETC 映像的 USB Enter> 键。 Dell OptiPlex FX160 21 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 22
Computer a 单击 More Applications b 单击 Thin Client Image (Thin Client 7 在 Thin Client Image (Thin Client a 找到 Target Hard Drive b Install Image c 在 Warning Erase and Install Image Thin Client Image Tool (Thin Client d Thin Client Image Tool (Thin Client e 关闭 Thin Client Image (Thin - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 23
- 年 Dell™ OptiPlex™ FX160 型號 DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 24
Dell™ n Microsoft® Windows 2008 Dell Inc Dell Inc Dell、DELL 徽標和 OptiPlex 是 Dell Inc Microsoft、Windows、 Windows Vista 和 Windows Vista Microsoft Corporation Dell Inc 型號 DC01T 2008 年 8 月 P/N H310K 修訂版 A01 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 25
™ OptiPlex™ FX160 Dell OptiPlex FX160 Microsoft® Windows® XP Embedded 或 SUSE® Linux Enterprise Thin Client (SLETC FX160 使用 Microsoft Windows 對 FX160 FX 160 Windows XP Embedded DVD DVD 啟動 FX160 FX160 Microsoft Windows WAIK) 軟體的 Windows DVD USB USB FX160 FX160 DVD 對 FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 26
64MB • FX160 Windows 更新 DVD。 使用 Copype.cmd UFD Windows PE RAM 磁碟。Windows PE RAM Windows PE Windows Windows PE Windows PE WAIK 1 下載 Microsoft WAIK 1GB)。 2 Windows OPK 或 Windows AIK Windows PE C:\Program Files\\Tools Windows OPK 或 Windows AIK。 26 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 27
.exe Comctl32.dll Oledlg.dll Wimgapi.dll Dell Image Deployment boot.wim 6 使用 peimg /prep peimg /prep c:\winpe_x86\mount\Windows 7 ImageX /unmount 與 /commit Winpe.wim imagex /unmount c:\winpe_x86\mount /commit 8 winpe_x86\ISO Boot.wim Boot.wim UFD Dell OptiPlex FX160 27 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 28
format fs=fat32 assign exit 10 winpe_x86\ISO UFD xcopy 複製 \ISO xcopy xcopy c:\winpe_x86\iso\*.* /s /e /f f:\ 其中,c f 則代表 UFD 11 UFD 裝置。 使用 UFD 裝置在 FX160 Windows FX160 1 關閉 FX160 2 Windows XP Embedded UFD USB 3 開啟 FX160 BIOS 按 存取 Boot Menu 28 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 29
Windows XP Embedded UFD Enter>。 完成 Windows PE Windows XP Embedded 5 FX160 Capture System Image BIOS System Boot Device Priority 6 Install System Image Install (安裝)。 7 使用 SUSE Linux Enterprise Thin Client 對 FX160 透過 Linux 或 Windows CD USB SLETC FX160 USB FX160 Thin Client - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 30
dev USB 6 確定 USB a 若 USB Linux b 若 USB dmesg dmesg USB 7 CD-ROM 寫入 USB dd bs=1M if= of= - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 31
4 在 USB Disk Image Tool (USB Browse CD 中的 SLETC 5 使用 Choose a USB device (選擇 USB USB 6 按一下 Write Disk Image Write Verify USB 7 當 Disk was imaged successfully Close (關閉)。 8 從 Windows USB CD。 使用 USB FX160 SLETC FX160 1 2 將存有 SLETC USB 3 開啟 FX160 Dell OptiPlex FX160 31 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 32
Thin Client a 尋找 Target Hard Drive b 按住 Install Image c 按一下 Warning Erase and Install Image Thin Client Image Tool (Thin Client d Thin Client Image Tool (Thin Client e 關閉 Thin Client Imager 視窗。 8 9 USB 裝置。 10 安裝在 FX160 Altiris Deployment Server (Altiris BIOS FX160 PXE Dell - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 33
Dell™ OptiPlex™ FX160 Handleiding voor het laden van een nieuwe image Model DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 34
duidt belangrijke informatie aan voor een beter gebruik van de computer. LET OP: Een KENNISGEVING duidt potentiële schade aan Dell Inc. is strikt verboden. Merken in deze tekst: Dell, het DELL-logo en OptiPlex zijn merken van Dell Inc.; Microsoft, Windows, Windows Vista en de Start-knop van Windows - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 35
Handleiding voor het maken van een nieuwe image op de Dell™ OptiPlex™ FX160 Op de Dell OptiPlex FX160-computer met een interne flashcard of vaste schijf is het besturingssysteem Microsoft® Windows® XP Embedded of SUSE® Linux Enterprise Thin Client (SLETC) vooraf geïnstalleerd. Als er echter - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 36
Windows PE-sessie wordt uitgevoerd. • Een USB-stick. De USB-stick moet een capaciteit hebben die minimaal 64 MB groter is dan de Windows PE-image plus alle aanvullende bestanden. • Een Windows update-dvd voor de FX160. 36 Handleiding voor het maken van een nieuwe image op de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 37
\winpe_x86\ISO \winpe_x86\mount 4 Gebruik onderstaande opdrachtregel om de Windows PE-basisimage (Winpe.wim) aan de map \mount te koppelen met behulp van ImageX: imagex /mountrw c:\winpe_x86\winpe.wim 1 c:\winpe_x86\mount Handleiding voor het maken van een nieuwe image op de Dell OptiPlex FX160 37 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 38
de USB-stick te formatteren in een Windows Vista- of Windows PE-omgeving. a Plaats de USB-stick in de computer waarop het Windows Vista-besturingssysteem of de Windows PE-sessie wordt uitgevoerd. b Formatteer of device> 38 Handleiding voor het maken van een nieuwe image op de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 39
een back-up van uw systeem op een extern station voordat u de nieuwe image laadt. 1 Schakel de FX160-computer uit. 2 Plaats de USB-stick met de update van de opstartbare Windows XP Embedded-image in een USB-poort. 3 Schakel de FX160-computer in. Druk als de lijst met opties van het BIOS-scherm wordt - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 40
vervolgens op Install (Installeren). 7 Start nadat de installatie is voltooid het systeem opnieuw op vanaf het station waarvan u een nieuwe image hebt gemaakt. Een nieuwe image maken op een FX160-computer met SUSE Linux Enterprise Thin Client U kunt op de FX160-computer een nieuwe image laden met - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 41
automatisch beschikbaar was gemaakt (en u dit vervolgens hebt opgeheven), gebruik dan de apparaatnaam die door Linux is toegewezen door onderstaande stappen op te volgen. b Als de USB-stick niet eerder beschikbaar stellen. Handleiding voor het maken van een nieuwe image op de Dell OptiPlex FX160 41 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 42
gebruiken om de nieuwe image op de FX160-computer te laden (zie "Een nieuwe SLETC-image op een FX160-computer maken met een USB-stick" op pagina 43). Een opstartbare Linux USB-stick maken met Windows De update-cd bevat de volgende drie bestanden: • Documentatie (*.pdf). • SLETC-update-bestand (*.raw - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 43
met opstarten en klik vervolgens op het bureaublad op de knop Computer. Doe het volgende in het venster dat wordt geopend: a Klik op More Applications (Meer toepassingen). b Klik op Thin Client Image (Thin Client-image). Handleiding voor het maken van een nieuwe image op de Dell OptiPlex FX160 43 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 44
in het venster Thin Client Image (Thin Client-image): a Selecteer in de vervolgkeuzelijst Target (Doel) de optie Hard Drive (Vaste schijf). WAARSCHUWING: Gebruik de computer niet voor andere taken terwijl de schijfimage wordt gemaakt. b Klik op de knop Install Image (Image installeren) en houd - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 45
Dell™ OptiPlex™ FX160 Guide de remplacement d'une image système Modèle DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 46
ère que ce soit sans l'autorisation écrite de Dell Inc. est strictement interdite. Marques utilisées dans ce texte : Dell, le logo DELL et OptiPlex sont des marques de Dell Inc. ; Microsoft, Windows, Windows Vista et le logo du bouton Démarrer de Windows Vista sont des marques ou des marques dépos - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 47
Guide de remplacement d'une image système Dell™ OptiPlex™ FX160 L'ordinateur Dell OptiPlex FX160 doté d'une carte flash/un disque dur interne est équipé d'un système d'exploitation Microsoft® Windows® XP Embedded ou SUSE® Linux Enterprise Thin Client (SLETC) installé en usine. Cependant, lorsque des - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 48
le remplacement de l'image système de l'ordinateur FX160 effacera toutes les données du disque dur ou de la carte flash. Avant d'en remplacer l'image système, sauvegardez les données de votre ordinateur sur un périphérique externe. 48 Guide de remplacement d'une image système - Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 49
, les variables d'environnement pointent automatiquement vers tous les outils nécessaires. Par défaut, tous les outils sont installés dans C:\Program Files\\Tools, où est soit Windows OPK, soit Windows AIK. Guide de remplacement d'une image système - Dell™ OptiPlex™ FX160 49 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 50
finale : peimg /prep c:\winpe_x86\mount\Windows 7 Appliquez les modifications au fichier image d'origine (Winpe.wim) en utilisant l'option ImageX /unmount associée à l'option /commit : imagex /unmount c:\winpe_x86\mount /commit 50 Guide de remplacement d'une image système - Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 51
le lecteur flash USB à partir d'un environnement Windows Vista ou Windows PE. a Sous Windows Vista ou dans une session Windows PE, insérez votre périphérique flash USB 11 Retirez le périphérique flash USB de l'ordinateur. Guide de remplacement d'une image système - Dell™ OptiPlex™ FX160 51 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 52
lection de l'emplacement, choisissez l'image système à installer, puis cliquez sur Install (Installer). 7 Une fois l'installation terminée, redémarrez le système, en démarrant à partir du lecteur où l'image système a été installée. 52 Guide de remplacement d'une image système - Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 53
la mise à jour SLETC. De nombreuses distributions Linux montent automatiquement le CD lorsqu'il est chargé. Dans cette procédure, le CD monté est /media/Novell_SLETC_pour_Dell 4 Insérez un lecteur flash USB dans un port USB. Guide de remplacement d'une image système - Dell™ OptiPlex™ FX160 53 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 54
de l'ordinateur sous Linux, puis servez-vous du lecteur pour remplacer l'image système de l'ordinateur FX160 (voir « Remplacement d'une image système SLETC sur un ordinateur FX160 à l'aide d'un lecteur flash USB », à la page 56). 54 Guide de remplacement d'une image système - Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 55
processus Write... (Écriture) et Verify... (Vérification) avant de retirer le lecteur flash USB. 7 Lorsque le message Disk was imaged successfully (La copie de l'image sur le disque a réussi) apparaît, cliquez sur Close (Fermer). Guide de remplacement d'une image système - Dell™ OptiPlex™ FX160 55 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 56
pour lancer l'opération d'écriture. c Dans la fenêtre Warning (Attention), cliquez sur Erase and Install Image (Effacer et installer l'image). Une fenêtre Thin Client Image Tool (Outil de gestion d'images Thin Client) s'ouvre. 56 Guide de remplacement d'une image système - Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 57
que l'environnement PXE. La documentation des logiciels Altiris est disponible à l'adresse : http://www.altiris.com/Support/Documentation.aspx Votre système FX160 dispose d'une licence d'utilisation d'Altiris Deployment Server. Guide de remplacement d'une image système - Dell™ OptiPlex™ FX160 57 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 58
58 Guide de remplacement d'une image système - Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 59
Dell™ OptiPlex™ FX160 Handbuch zur Image-Wiederherstellung Modell DC01T www.dell.com | support.euro.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 60
Unterlagen in jeglicher Weise ohne schriftliche Genehmigung von Dell Inc. ist strengstens untersagt. In diesem Text verwendete Marken: Dell, das DELL-Logo und OptiPlex sind Marken von Dell Inc.; Microsoft, Windows, Windows Vista, und die Windows Vista Startschaltfläche sind Marken oder eingetragene - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 61
Dell™ OptiPlex™ FX160 Handbuch zur Image-Wiederherstellung Auf dem Dell OptiPlex FX160-Computer mit interner Flash-KartenFestplatte ist entweder Microsoft® Windows® XP Embedded oder SUSE® Linux Enterprise Thin Client (SLETC) als Betriebssystem vorab installiert. Wenn Systemaktualisierungen - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 62
Windows-USB-Flashlaufwerks VORSICHT: Bei der Image-Wiederherstellung auf dem FX160-Computer werden alle Daten von der Festplatte und der Flash-Karte gelöscht. Sichern Sie Ihr System auf einem externen Gerät, bevor Sie auf Ihrem Computer eine ImageWiederherstellung durchführen. 62 Dell OptiPlex - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 63
automatisch so eingestellt, dass alle erforderlichen Tools angezeigt werden. Standardmäßig werden alle Tools in folgendem Pfad installiert: C:\Program Files\\Tools, dabei kann Windows OPK oder Windows AIK sein. Dell OptiPlex FX160 Handbuch zur Image-Wiederherstellung 63 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 64
kopieren. 6 Bereiten Sie das Image mit dem Befehl peimg /prep vor. Dieser Befehl entfernt alle nicht installierten Pakete aus dem Image, um die Größe des endgültigen Image zu reduzieren: peimg /prep c:\winpe_x86\mount\Windows 64 Dell OptiPlex FX160 Handbuch zur Image-Wiederherstellung - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 65
Windows Vista oder einer Windows PEUmgebung zu formatieren. a Setzen Sie das USB-Flashlaufwerk in einer Sitzung von Windows Vista oder Windows /f f:\ Der Buchstabe c steht für die Festplatte des Computers und f für das USB-Flashlaufwerk. Dell OptiPlex FX160 Handbuch zur Image-Wiederherstellung 65 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 66
eine ImageWiederherstellung durchführen. 1 Schalten Sie den FX160-Computer ab. 2 Schließen Sie das USB-Flashlaufwerk mit der startfähigen Image-Aktualisierung von Windows XP Embedded an den USB-Anschluss an. 3 Schalten Sie den FX160-Computer ein. Wird das BIOS-Fenster mit der Optionsliste (in - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 67
mit integrierter Aktualisierungs-CD und entweder Linux oder Windows als Betriebssystem. Nachdem der FX160-Computer über das USB-Flashlaufwerk gestartet wurde, kopiert das Dienstprogramm „Thin Client Imaging" alle SLETC-Dateien in das FX160-Flashlaufwerk (Festplatte). Das USB-Flashlaufwerk sollte - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 68
ist, entfernen Sie das USB-Flashlaufwerk aus dem Linux-System und verwenden Sie es zur Image-Wiederherstellung des FX160-Computers (siehe "Wiederherstellen eines SLETC-Image auf einem FX160-Computer mit USB-Flashlaufwerk" auf Seite 70). 68 Dell OptiPlex FX160 Handbuch zur Image-Wiederherstellung - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 69
eines in Linux startfähigen USB-Flashlaufwerks unter Windows Die bereitgestellte Aktualisierungs-CD beinhaltet diese drei Dateien: • Dokumentation (*.pdf) • SLETC-Aktualisierungsdatei (*.raw). Der Name dieser Datei gibt die Versionsstufe von SLETC wieder. • Windows USB-Flashlaufwerk Image Installer - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 70
auf Thin Client Image. 7 Im Fenster Thin Client Image: a Suchen Sie das Pulldown-Menü Target (Ziel) und wählen Sie Hard Drive (Festplatte). VORSICHT: Beim Schreiben des CD-Image dürfen Sie keine anderen Vorgänge mit Ihrem Computer ausführen. b Klicken Sie auf die Schaltfläche Install Image (Image - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 71
Erase and Install Image (Löschen und Image installieren). Das Fenster Thin Client Image Tool wird geöffnet. d Ist der Schreibvorgang des CD-Image abgeschlossen, schließt sich das Fenster Thin Client Image Tool wieder. e Schließen Sie das Fenster Thin Client Imager. 8 Fahren Sie den Computer herunter - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 72
72 Dell OptiPlex FX160 Handbuch zur Image-Wiederherstellung - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 73
Dell™ OptiPlex™ FX160 Guida al re-imaging Modello DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 74
qualsiasi strumento, senza l'autorizzazione scritta di Dell Inc. Marchi commerciali utilizzati in questo testo: Dell, il logo DELL e OptiPlex sono marchi commerciali di Dell Inc.; Microsoft, Windows, Windows Vista e il pulsante Start di Windows Vista sono marchi commerciali o marchi registrati di - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 75
Guida al re-imaging di Dell™ OptiPlex™ FX160 Sul computer Dell OptiPlex FX160 con disco rigido della scheda flash interno è precaricato il sistema operativo Microsoft® Windows® XP Embedded o SUSE® Linux Enterprise Thin Client (SLETC). Tuttavia, quando vengono rilasciati aggiornamenti del sistema o - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 76
Windows Vista o una sessione di Windows PE. • Un dispositivo UFD. Le dimensioni del dispositivo UFD devono superare di almeno 64 MB la dimensione dell'immagine di Windows PE più i file aggiuntivi inclusi. • DVD di aggiornamento Windows FX160. 76 Guida al re-imaging di Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 77
create le seguenti directory: \winpe_x86 \winpe_x86\ISO \winpe_x86\mount 4 Nel prompt dei comandi, montare l'immagine base di Windows PE (Winpe.wim) sulla directory \mount tramite ImageX: imagex /mountrw c:\winpe_x86\winpe.wim 1 c:\winpe_x86\mount Guida al re-imaging di Dell OptiPlex FX160 77 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 78
di Windows PE, inserire il dispositivo UFD. b Formattare l'intero dispositivo UFD come una singola unità FAT32. Nel seguente esempio, il dispositivo UFD è disk 1. Aprire una finestra di comando e immettere quanto segue: diskpart select disk 1 clean 78 Guida al re-imaging di Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 79
del sistema su una periferica esterna prima del re-imaging del computer. 1 Spegnere il computer FX160. 2 Collegare il dispositivo UFD con l'aggiornamento dell'immagine di Windows XP Embedded di avvio a una porta USB. 3 Accendere il computer FX160. Quando viene visualizzato l'elenco di opzioni della - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 80
del computer. 6 Per installare una nuova immagine del sistema, fare clic sul pulsante Install System Image ( imaging. Re-imaging del computer FX160 con SUSE Linux Enterprise Thin Client È possibile eseguire il re-imaging del computer FX160 Linux. 80 Guida al re-imaging di Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 81
desktop Linux, aprire una finestra terminale. 2 Se l'accesso non è stato effettuato come utente "principale", immettere il comando: su - 3 Montare il CD-ROM contenente l'aggiornamento di SLETC. Molte versioni di Linux per l'unità memoria flash USB. Guida al re-imaging di Dell OptiPlex FX160 81 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 82
per il re-imaging del computer FX160 (vedere "Re-imaging di SLETC su un computer FX160 con un'unità memoria flash USB" a pagina 83). Creazione di un'unità memoria flash USB di avvio Linux con Windows Il CD di aggiornamento fornito include i tre file seguenti: • Documentazione (*.pdf) • File di - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 83
il sistema operativo SLETC è stato avviato completamente, fare clic sul pulsante Computer sul desktop. Nella finestra che viene aperta: a Fare clic su More Applications (Altre applicazioni). b Selezionare Thin Client Image (Immagine Thin Client). Guida al re-imaging di Dell OptiPlex FX160 83 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 84
finestra Thin Client Image (Immagine Thin Client): a Trovare il menu a discesa Target (Destinazione) e selezionare Hard Drive (Disco rigido). ATTENZIONE: quando l'immagine del disco è stata scritta, non eseguire altre operazioni con il computer. b Fare clic e tenere premuto il pulsante Install Image - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 85
Dell™ OptiPlex™ FX160 モデル DC01T www.dell.com/jp | support.jp.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 86
Dell™ n Microsoft® Windows 2008 Dell Inc. All rights reserved. Dell Inc Dell、DELL OptiPlex は Dell Inc Microsoft、 Windows、Windows Vista および Windows Vista Microsoft Corporation Dell Inc モデル DC01T 2008 年 8 月 P/N H310K Rev. A01 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 87
Dell™ OptiPlex™ FX160 Dell OptiPlex FX160 Microsoft® Windows® XP Embedded または SUSE® Linux Enterprise Thin Client(SLETC Microsoft Windows 搭載 FX160 FX160 Windows XP Embedded DVD FX160 DVD FX160 DVD Microsoft Windows Automation Installation Kit(WAIK Windows USB FX160 USB FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 88
USB UFD FX160 UFD Windows PE RAM FX160 UFD Windows UFD 警告:FX160 Microsoft Vista または Microsoft XP • Windows Vista または Windows PE • UFD UFD Windows PE 64 MB • FX160 Windows DVD。 Copype.cmd UFD Windows PE RAM Windows PE RAM メモ:Windows PE 88 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 89
dest x86 winpe_x86 \winpe_x86\ISO \winpe_x86\mount 5 ImageX Windows PE Winpe.wim)を \mount imagex /mountrw c:\winpe_x86\winpe.wim 1 c:\winpe_x86\mount 6 DVD から \winpe_x86\mount\windows\system32 winpeshl.ini DellImageDeploy.exe Comctl32.dll Oledlg.dll Wimgapi.dll Dell OptiPlex FX160 89 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 90
wim 警告:UFD 10 UFD Diskpart Windows Vista または Windows PE 環境で UFD a Windows Vista Windows PE UFD b UFD 全体を 1 つの FAT32 UFD が disk 1 diskpart select disk 1 clean create partition primary size= select partition 1 active format fs=fat32 assign exit 90 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 91
FX160 1 FX160 2 Windows XP Embedded UFD USB 3 FX160 BIOS F12 Boot Menu 4 Boot Device Windows XP Embedded UFD Enter Windows PE Windows XP Embedded 5 現在の FX160 Capture System Image BIOS の System Boot Device Priority 6 Install System Image Install 7 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 92
Client Imaging SLETC を FX160 USB 512 MB です。 Linux での Linux USB CD 3 pdf)。 • SLETC raw SLETC • Windows USB USBDiskImageTool.exe)。 USB UFD Linux 1 Linux 2 root su - 3 SLETC CD-ROM Linux CD CD は /media/Novell_SLETC_for_Dell 4 USB USB 5 USB a mount 92 Dell - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 93
に は CD-ROM 上 の SLETC media/Novell_SLETC_for_Dell/Novell-SLETC-10-SP2-1-forDell.raw)、 には USB 8 USB Linux FX160 94 USB FX160 SLETC Windows での Linux USB CD 3 pdf)。 • SLETC raw SLETC の Windows USB (USBDiskImageTool.exe)。 Dell OptiPlex FX160 93 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 94
.exe Windows Vista 4 USB Disk Image Too(l USB Browse CD の SLETC 5 Choose a USB device(USB USB 6 Write Disk Image Write Verify USB 7 Disk was imaged successfully Close 8 Windows USB CD USB FX160 SLETC 警告:FX160 1 2 SLETC USB 94 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 95
Thin Client Image(Thin Client 7 Thin Client Image(Thin Client ます。 a Target Hard Drive b Install Image 1 c Warning Erase and Install Image Thin Client Image Tool (Thin Client d Thin Client Image Tool (Thin Client e Thin Client Image(Thin Client 8 9 USB 10 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 96
FX160 Altiris Deployment Server BIOS FX160 Preboot Execution Environment(PXE PXE Altiris http://www.altiris.com/Support/Documentation.aspx FX160 Altiris Deployment Server 96 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 97
Dell™ OptiPlex™ FX160 모델 DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 98
Dell™ n Microsoft® Windows 2008 Dell Inc Dell Inc Dell, DELL 로고 및 OptiPlex는 Dell Inc Microsoft, Windows, Windows Vista 및 Windows Vista Microsoft Corporation Dell Inc 모델 DC01T 2008년 8월 P/N H310K Rev. A01 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 99
Dell™ OptiPlex™ FX160 Dell OptiPlex FX160 Microsoft® Windows® XP Embedded 또는 SUSE® Linux Enterprise Thin Client(SLETC FX160 FX160 Microsoft Windows FX160 Windows XP Embedded DVD DVD로 FX160 FX160 Windows Microsoft Windows Automation Installation Kit(WAIK DVD USB USB FX160 FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 100
USB UFD FX160 Windows PE RAM UFD FX160 UFD Windows UFD 주의: FX160 Microsoft Vista 또는 Microsoft XP • Windows Vista 또는 Windows PE • UFD 장치. UFD Windows PE 64MB • FX160 Windows DVD Copype.cmd Windows PE RAM UFD Windows PE RAM Windows PE 100 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 101
c:\winpe_x86 dest x86 \winpe_x86 \winpe_x86\ISO \winpe_x86\mount 4 ImageX Windows PE 이미지 (Winpe.wim)를 \mount imagex /mountrw c:\winpe_x86\winpe.wim 1 c:\winpe_x86\mount 5 DVD에서 \winpe_x86\mount\windows\system32 winpeshl.ini DellImageDeploy.exe Comctl32.dll Dell OptiPlex FX160 101 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 102
Boot.wim 주의: UFD 9 UFD Diskpart UFD를 Windows Vista 또는 Windows PE a Windows Vista Windows PE 세션에 UFD b 전체 UFD FAT32 UFD를 disk 1 diskpart select disk 1 clean create partition primary size= select partition 1 active format fs=fat32 assign exit 102 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 103
FX160 1 FX160 2 Windows XP Embedded UFD 장치를 USB 3 FX160 BIOS F12 Boot 4 Boot Device Windows XP Embedded UFD Enter Windows PE Windows XP Embedded 5 현재 FX160 Capture System Image BIOS의 System Boot Device Priority 6 Install System Image Install 7 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 104
Imaging(Thin Client SLETC을 FX160 USB 512MB Linux Linux USB CD pdf) • SLETC raw SLETC • Windows USB USBDiskImageTool.exe). USB UFD Linux 1 Linux 2 "root su - 3 SLETC CD-ROM Linux CD CD media/Novell_SLETC_for_Dell 4 USB USB 5 USB a mount 104 Dell OptiPlex - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 105
bs=1M if= of= SLETC update>는 CD-ROM SLETC media/Novell_SLETC_for_Dell/NovellSLETC-10-SP2-1-for-Dell.raw)이고 는 USB 8 Linux USB FX160 106 USB FX160 SLETC Windows Linux USB CD pdf) • SLETC raw SLETC Dell OptiPlex FX160 105 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 106
USB USB 2 CD 3 USBDiskImageTool.exe Windows Vista 4 USB Disk Image Tool(USB Browse CD SLETC 5 Choose a USB device(USB USB 6 Write Disk Image Write Verify USB 7 Disk was imaged successfully Close 8 Windows USB CD USB FX160 SLETC 주의: FX160 106 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 107
Thin Client Image(Thin Client 7 Thin Client Image(Thin Client a Target Hard Drive b Install Image 1 c Warning Erase and Install Image Thin Client Image Tool(Thin Client d Thin Client Image Tool(Thin Client e Thin Client Imager(Thin Client 8 9 USB 10 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 108
FX160 Altiris Deployment Server BIOS FX160 PXE Dell PXE Altiris http://www.altiris.com/Support/Documentation.aspx FX160 Altiris Deployment Server 108 Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 109
Guía para la generación de imágenes de Dell™ OptiPlex™ FX160 Modelo DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 110
forma sin la autorización por escrito de Dell Inc. Marcas comerciales utilizadas en este texto: Dell, el logotipo de DELL y OptiPlex son marcas comerciales de Dell Inc.; Microsoft, Windows, Windows Vista y el botón de inicio de Windows Vista son marcas comerciales o marcas comerciales registradas - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 111
Guía para la generación de imágenes El equipo Dell OptiPlex FX160 con unidad de disco duro con tarjeta flash interna tiene precargado el sistema operativo Microsoft® Windows® XP incorporado o SUSE® Linux Enterprise Thin Client (SLETC). Cuando se lanzan actualizaciones del sistema o se requieren - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 112
sesión de Windows Vista o Windows PE. • Una unidad UFD. El tamaño de la unidad UFD debe ser al menos 64 MB mayor que la imagen de Windows PE y los archivos adicionales que incluya. • DVD de actualización de Windows del equipo FX160. 112 Guía para la generación de imágenes de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 113
directorios: \winpe_x86 \winpe_x86\ISO \winpe_x86\mount 4 En el símbolo del sistema, monte la imagen de Windows PE base (Winpe.wim) en el directorio \mount mediante ImageX: imagex /mountrw c:\winpe_x86\winpe.wim 1 c:\winpe_x86\mount Guía para la generación de imágenes de Dell OptiPlex FX160 113 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 114
windows\system32\: winpeshl.ini DellImageDeploy.exe Comctl32.dll Oledlg.dll Wimgapi.dll NOTA: la preparación de imágenes que se realiza en el siguiente paso no es necesaria para la herramienta de implementación de imágenes Dell Image 114 Guía para la generación de imágenes de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 115
System Image (Capturar imagen de sistema) y siga las indicaciones para guardar la imagen del sistema en un dispositivo externo. Cuando la operación de captura finaliza, aparece de nuevo la ventana de la herramienta de creación de imágenes. Guía para la generación de imágenes de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 116
Install (Instalar). 7 Cuando finalice la instalación, reinicie el sistema, arrancando desde la unidad desde la que se ha creado la imagen. Generación de imágenes del equipo FX160 con SUSE Linux Enterprise Thin Client operativo Linux. 116 Guía para la generación de imágenes de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 117
flash USB se montó automáticamente (y posteriormente se desmontó), utilice el nombre de dispositivo asignado por Linux en los siguientes pasos. b Si la unidad flash USB no se montó anteriormente, genere un of= Guía para la generación de imágenes de Dell OptiPlex FX160 117 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 118
de acceso de usuarios para continuar. 4 En la ventana USB Disk Image Tool (Herramienta de imágenes de disco USB) haga clic en el botón Browse (Examinar) y seleccione el archivo de actualización de SLETC en el CD de actualización. 118 Guía para la generación de imágenes de Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 119
(Más aplicaciones). b Haga clic en Thin Client Image (Imagen de Thin Client). 7 En la ventana Thin Client Image (Imagen de Thin Client): a Encuentre el menú desplegable Target (Destino) y seleccione Hard Drive (Disco duro). Guía para la generación de imágenes de Dell OptiPlex FX160 119 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 120
la operación de escritura. c En la ventana Warning (Advertencia), haga clic en Erase and Install Image (Borrar e instalar imagen). Se abre la ventana Thin Client Image Tool (Herramienta de imagen de Thin Client). d Cuando se finaliza la operación de escritura de imagen del disco, se cierra la - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 121
Dell™ OptiPlex™ FX160 Handbok för ny image Modell DC01T www.dell.com | support.dell.com - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 122
Med ensamrätt. Återgivning i någon form utan skriftligt tillstånd från Dell Inc. är strängt förbjuden. Varumärken som används i texten: Dell, DELL-logotypen och OptiPlex är varumärken som tillhör Dell Inc. Microsoft, Windows, Windows Vista och Windows Vista-startknappen är antingen varumärken eller - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 123
Dell™ OptiPlex™ FX160 - handbok för ny image I Dell OptiPlex FX160-datorn med ett internt flashkort eller hårddisk är antingen Microsoft® Windows® XP Embedded- eller SUSE® Linux Enterprise Thin Client-operativsystemet (SLETC) förinstallerat. När systemuppdateringar släpps eller - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 124
Windows PE RAM-disk på en USB-flashenhet. Med Windows PE RAM kan en dator startas om för driftsättning eller återställning. OBS! Kontrollera att du har tillräckligt med minne för storleken på Windows PE-imagefilen och eventuella ytterligare program. 124 Dell OptiPlex FX160 - handbok för ny image - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 125
hjälp av ImageX: imagex /mountrw c:\winpe_x86\winpe.wim 1 c:\winpe_x86\mount 5 Kopiera följande filer från uppdaterings-dvd-skivan till katalogen \winpe_x86\mount\windows\system32\: winpeshl.ini DellImageDeploy.exe Comctl32.dll Oledlg.dll Wimgapi.dll Dell OptiPlex FX160 - handbok för ny image 125 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 126
imagefilen genom att ta bort ej installerade paket från den: peimg /prep c:\winpe_x86\mount\Windows 7 Tillämpa ändringarna på den ursprungliga imagefilen (Winpe.wim) med hjälp av device> select partition 1 active format fs=fat32 assign exit 126 Dell OptiPlex FX160 - handbok för ny image - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 127
på knappen Install System Image (Installera systemimage). I bläddringsfönstret väljer du den systemimage som du vill installera och klickar sedan på Install (installera). 7 När installationen är klar startar du om systemet och startar från den enhet som du skapade en image av. Dell OptiPlex FX160 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 128
image för FX160-datorn med SUSE Linux Enterprise Thin Client Du kan skapa en ny image för FX160-datorn med en SLETC-uppdatering med hjälp av en startbar USB-flashenhet som skapats med uppdatering-cdskivan och ett Linux- eller Windows-datorsystem. När FX160 Dell OptiPlex FX160 - handbok för ny image - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 129
och sedan demonterades) använder du det enhetsnamn som tilldelas av Linux i stegen nedan. b Om USB-flashenheten inte har monterats en ny image för FX160-datorn (se "Skapa en ny image med SLETC för FX160-datorn med en USBflashenhet" på sidan 131). Dell OptiPlex FX160 - handbok för ny image 129 - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 130
Verify (bekräfta) slutförs innan du tar bort USB-flashenheten. 7 När meddelandet Disk was imaged successfully (en image av disken har skapats) visas klickar du på Close (stäng). 8 Ta bort USB-flash-enheten och uppdaterings-cd-skivan från Windows-systemet. 130 Dell OptiPlex FX160 - handbok för ny - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 131
(fler program). b Klicka på Thin Client Image. 7 I fönstret Thin Client Image: a Sök efter listrutan Target (mål) och välj Hard Drive (hårddisk). VARNING! Utför inga andra åtgärder i datorn medan diskimagefilen skrivs. b Håll knappen Install Image (installera image) nedryckt i en sekund så startas - Dell OptiPlex FX160 | Dell™ OptiPlex™ FX160 Re-Imaging Guide - Page 132
av en automatiseringspartition i stället för PXE, vilket ger större säkerhet. Dokumentation för Altiris-programvara finns på: http://www.altiris.com/Support/Documentation.aspx FX160-systemet är licensierat för användning av Altiris Deployment Server. 132 Dell OptiPlex FX160 - handbok för ny image
www.dell.com | support.dell.com
Dell™ OptiPlex™ FX160
Re-Imaging Guide
Model DC01T