Dell OptiPlex GX260N User Guide - Page 23
Boot Sequence, Option Settings, Changing Boot Sequence for the Current Boot - boot disk
View all Dell OptiPlex GX260N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
spacebar or Enters the selected field's pop-up options menu. In the selected field's pop-up options menu, cycles through the options in a field. Exits system setup without restarting the computer and returns the computer to the boot routine. Exits system setup and restarts the computer, implementing any changes you have made. Resets the selected option to the default. Boot Sequence This feature allows users to change the sequence of devices from which the computer boots. Option Settings Normal - (Available only for the current boot process) The computer attempts to boot from the sequence of devices specified in system setup. Diskette Drive - The computer attempts to boot from the floppy drive. If the floppy disk in the drive is not bootable, or if no floppy disk is in the drive, the computer generates an error message. Hard Drive - The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message. CD Drive - The computer attempts to boot from the CD drive. If no CD is in the drive, or if the CD has no operating system, the computer generates an error message. PXE - As the computer boots, press to display a menu that allows you to select a method for booting from a network server. If a boot routine is not available from the network server, the system attempts to boot from the next device in the boot sequence list. USB Flash Device - Insert the key into a USB port and restart the computer. When F12 = Boot Menu appears in the upper-right corner of the screen, press . The BIOS detects the key and adds the USB key option to the boot menu. NOTE: To boot to a USB Flash Device, the device must be bootable. To make sure your device is bootable, check the device documentation or website. Changing Boot Sequence for the Current Boot You can use this feature, for example, to tell the computer to boot from the CD drive so you can run the Dell Diagnostics, but specify that the computer boots from the hard drive when the diagnostic tests are complete. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop, then shut down your computer and try again.