Dell PowerConnect 6248P Command Line Interface Guide - Page 1104

Examples The following example enables the device to use Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. console(config)# sntp unicast client enable clock timezone hours-offset Use the clock timezone [ hours-offset ] [minutes minutes-offset] [zone acronym] command to set the offset to Coordinated Universal Time (UTC). If the optional parameters are not specified, they will be read as either '0' or '\0, as appropriate. Syntax clock timezone hours-offset [minutes minutes-offset] [zone acronym] • hours-offset - Hours difference from UTC. (Range: -12 to +13) • minutes-offset - Minutes difference from UTC. (Range: 0-59) • acronym - The acronym for the time zone. (Range: Up to four characters) Command Mode Global Configuration Default Value No default setting User Guidelines No specific guidelines Example console(config)#clock timezone -5 minutes 30 zone IST no clock timezone Use the no clock timezone command to reset the time zone settings. 1104 Clock Commands