Dell PowerConnect 6248P Command Line Interface Guide - Page 948

console(config-rtr)#default-information originate metric 100 metric-type 2 default-metric Use the default-metric command in Router OSPFv3 Configuration mode to set a default for the metric of distributed routes. Syntax default-metric metric no default-metric • metric - Metric value used for distribution (Range: 1-16777214) Default Configuration This command has no default configuration. Command Mode Router OSPFv3 Configuration mode. User Guidelines This command has no user guidelines. Example The following example sets a default of 100 for the metric of distributed routes. console(config)#ipv6 router ospf console(config-rtr)#default-metric 100 distance ospf The distance ospf command sets the preference values of OSPF route types in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, external. All the external type routes are given the same preference value. Use the "no" form of this command to reset the preference values to the default. 948 OSPFv3 Commands