Dell PowerConnect 6248P Command Line Interface Guide - Page 413

• transmit-interval - The interval in seconds at which to transmit local data LLDPDUs. (Range: 5-32768 seconds) • hold-multiplier - Multiplier on the transmit interval used to set the TTL in local data LLDPDUs. (Range: 2-10) • reinit-delay - The delay in seconds before re-initialization. (Range: 1-10 seconds) Default Configuration The default transmit interval is 30 seconds. The default hold-multiplier is 4. The default delay before re-initialization is 2 seconds. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. Examples The following example displays how to configure LLDP to transmit local information every 1000 seconds. console(config)#lldp timers interval 1000 The following example displays how to set the timing parameter at 1000 seconds with a hold multiplier of 8 and a 5 second delay before reinitialization. console(config)#lldp timers interval 1000 hold 8 reinit 5 lldp transmit Use the lldp transmit command in Interface Configuration mode to enable the LLDP advertise (transmit) capability. To disable local data transmission, use the no form of this command. LLDP Commands 413