Dell PowerConnect 6248P Command Line Interface Guide - Page 632

Field Port Admin mode Oper mode Reauth Control Reauth Period Username Quiet period Transmit period Maximum Requests Max Users VLAN Assigned Description The port number. The port admin mode. Possible values are: Force-auth, Force-unauth, Auto, and mac-based. The control mode under which this port is operating. Possible values are: Authorized or Unauthorized. Indicates whether re-authentication is enabled on this port. The timer used by the authenticator state machine on this port to determine when reauthentication of the supplicant takes place. The value is expressed in seconds and will be in the range of 1 and 65535. The username representing the identity of the Supplicant. This field shows the username when the port control is auto or mac-based. If the port is Authorized, it shows the username of the current user. If the port is unauthorized it shows the last user that was authenticated successfully. The number of seconds that the switch remains in the quiet state following a failed authentication exchange (for example, the client provided an invalid password). The number of seconds that the switch waits for a response to an Extensible Authentication Protocol (EAP)-request/identity frame from the client before resending the request. The maximum number of times that the switch sends an Extensible Authentication Protocol (EAP)-request frame (assuming that no response is received) to the client before restarting the authentication process. The maximum number of clients that can get authenticated on the port in the MAC-based dot1x authentication mode. The VLAN assigned to the client by the radius server. When VLAN assignments are disabled, RADIUS server does not assign any VLAN to the port, and this field is blank. 632 802.1x Commands