Dell PowerEdge 2200 Service Manual - Page 73
Table A-4., Advanced Menu Categories, for Serial Port 2. Options are Disabled; 2F8
View all Dell PowerEdge 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table A-4. Advanced Menu Categories Category Function Serial Port 1 Selects a unique address and interrupt request for Serial Port 1. Options are Disabled; 3F8, IRQ4; 3E8, IRQ4; and Auto (default). Auto selects the next available combination. Serial Port 2 Selects a unique address and interrupt request for Serial Port 2. Options are Disabled; 2F8, IRQ3; 2E8, IRQ3; and Auto (default). Auto selects the next available combination. Parallel Port Selects a unique address and interrupt request for LPT Port. Options are Disabled; 378, IRQ5; 3BC, IRQ7; 278, IRQ5; 378, IRQ7 (default); and Auto. Auto selects the next available combination. Parallel Mode Controls whether system's built-in parallel port acts as an Output Only (ATcompatible) (default), Bidirectional (PS/2compatible), or ECP (extended capabilities port). Diskette Controller Enables (default) or disables system's built-in diskette controller. On Board SCSI Enables (default) or disables the built-in PCI SCSI controller and determines if it is scanned as a boot drive. PCI Scan Sequence Determines the sequence the PCI devices are scanned. Use MP Specifications Configures the Multiprocessor Specification level. The default is 1.4; however, some operating systems use 1.1. PS/2 Mouse Enables (default) or disables the built-in mouse controller. System Setup Program A-7