Dell PowerVault 221S Rack Installation Guide - Page 11
Installing the RapidRails Mounting Rails
View all Dell PowerVault 221S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 Place a mark 13.3 centimeters (5.25 inches) above the original mark (or count up nine holes in a rack that meets EIA-310 standards) and mark the rack's front vertical rails with a felt-tipped marker or place masking tape where the system's upper edge will be located (see Figure 1-4). Figure 1-4. Marking the Vertical Rails 3-U (5.25 inches) between rails (drawing is not to scale) tape marking locations for top and bottom of system Installing the RapidRails Mounting Rails NOTE: If you are installing VersaRails rails, see "Installing the VersaRails Mounting Rails." 1 At the front of the rack cabinet, position one of the mounting rails so that its mounting-bracket flange fits between the marks or tape you placed on the rack (see Figure 1-5). 2 Align the rail mounting-bracket flange (on the front of the rail) with the square holes in the front vertical rails (see Figure 1-5). Rack Installation Guide 1-7