Dell PowerVault 221S Rack Installation Guide - Page 13
Installing the VersaRails Mounting Rails
View all Dell PowerVault 221S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the VersaRails Mounting Rails NOTE: If you have already installed RapidRails mounting rails, skip this section. 1 At the front of the rack cabinet, position one of the mounting rails so that its mounting-bracket flange fits at the location you have selected in the rack (see Figure 1-6). The vertical rail holes in rack cabinets may be round or square. Figure 1-6. Installing the VersaRails Mounting Rails vertical rail holes may be round or square mounting holes (2) mounting-bracket flange front of rack VersaRails mounting rail (2) 2 Push the mounting rail forward until the mounting holes are aligned with the holes on the front vertical rail. 3 Using two 10-32 x 0.5 Phillips screws, secure the front mounting-bracket flange to the front vertical rail. 4 At the back of the cabinet, pull back on the back mounting-bracket flange until it is aligned with the holes on the back vertical rail. Rack Installation Guide 1-9