Dell PowerVault MD3200i Deployment Guide - Page 42
Select Storage Array, Storage Array Login, Host Address, Apply, Connect to Additional Arrays, Finish
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
14 If you selected Yes in the last step, then the Select Storage Array screen is displayed. Select the storage array that you want to configure for connectivity to the local host. NOTE: The storage arrays configured by the utility are marked as Configuration Complete against their names in the list. This helps you to identify the arrays that are ready to be configured for host access. 15 In the Storage Array Login screen, in the Controller# column, select the iSCSI host port of the storage array that needs to be configured and it's IP address(es). In the Host Address column, from drop-down menu list, select the host IP address that will login to the iSCSI host port of the storage array. See "Source Port Selection for iSCSI Host Ports" on page 44' for more information about how these host IP addresses are listed in the drop-down menu and the recommended guidelines for selecting the host IP addresses. Click Next to continue to enter the log in information for another controller or Click Apply to save the log in information. 16 In the Connect to Additional Arrays screen, select whether you want to connect to another storage array or not. If you want to connect to another storage array, repeat the above steps starting from step 14. If you do not want to connect to additional arrays, then click Finish on the final screen to exit the utility. 42 Post Installation Tasks