Dell PowerVault MD3200i Deployment Guide - Page 70

for Mutual CHAP., <Report_To_PNP&gt

Get Dell PowerVault MD3200i PDF manuals and user guides View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

If you are using Windows Server 2008 Core Version: 1 Set the iSCSI initiator services to start automatically (if not already set): sc \\ config msiscsi start= auto 2 Start the iSCSI service (if necessary): sc start msiscsi 3 Log on to the target: iscsicli PersistentLoginTarget * * * * where - is the target name as displayed in the target list. Use the iscsicli ListTargets command to display the target list. - is T, which exposes the LUN to the operating system as a storage device. - is the IP address of the iSCSI port on the controller being logged in to. - is 3260. - is 0x2 to enable multipathing for the target on the initiator. This value allows more than one session to be logged in to a target at one time. - is the initiator name. - is the target CHAP secret. - is either 0 for no authentication, 1 for Target CHAP, or 2 for Mutual CHAP. : NOTE: , and are optional parameters. They can be replaced with an asterisk (*) if CHAP is not used. - is 0, indicating that no mappings are specified and no further parameters are required. * * * An asterisk (*) represents the default value of a parameter. 70 Appendix-Manual Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
70
Appendix—Manual Configuration
If you are using
Windows Server 2008 Core Version
:
1
Set the iSCSI initiator services to start automatically (if not already set):
sc \\<server_name> config msiscsi start= auto
2
Start the iSCSI service (if necessary):
sc start msiscsi
3
Log on to the target:
iscsicli PersistentLoginTarget <Target_Name>
<Report_To_PNP> <Target_Portal_Address>
<TCP_Port_Number_Of_Target_Portal> * * *
<Login_Flags> * * * * * <Username> <Password>
<Authtype> * <Mapping_Count>
where
–
<Target_Name>
is the target name as displayed in the target list. Use
the iscsicli ListTargets command to display the target list.
–
<Report_To_PNP>
is T, which exposes the LUN to the operating
system as a storage device.
–
<Target_Portal_Address>
is the IP address of the iSCSI port on the
controller being logged in to.
–
<TCP_Port_Number_Of_Target_Portal>
is 3260.
–
<Login_Flags>
is 0x2 to enable multipathing for the target on the
initiator. This value allows more than one session to be logged in to a
target at one time.
–
<Username>
is the initiator name.
–
<Password>
is the target CHAP secret.
–
<Authtype>
is either 0 for no authentication, 1 for Target CHAP, or 2
for Mutual CHAP.
:
NOTE:
<Username>
,
<Password>
and
<Authtype>
are optional parameters.
They can be replaced with an asterisk (*) if CHAP is not used.
–
<Mapping_Count>
is 0, indicating that no mappings are specified
and no further parameters are required.
*
*
*
An asterisk (*) represents the default value of a parameter.