Dell PowerVault MD3200i Deployment Guide - Page 48
Internet Protocol TCP/IP, TCP/IP WINS server
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
3 On the General tab (for a local area connection) or the Networking tab (for all other connections), select Internet Protocol (TCP/IP), and then click Properties. 4 Select Use the following IP address and enter the IP address, subnet mask, and default gateway addresses. If you are using a DNS server: 1 In the Control Panel, select Network connections or Network and Sharing Center and then click Manage network connections. 2 Right-click the network connection you want to configure and select Properties. 3 On the General tab (for a local area connection) or the Networking tab (for all other connections), select Internet Protocol (TCP/IP), and then click Properties. 4 Select Obtain DNS server address automatically or enter the preferred and alternate DNS server IP addresses and click OK. If you are using a WINS server: NOTE: If you are using a DHCP server to allocate WINS server IP addresses, you do not need to add WINS server addresses. 1 In the Control Panel, select Network connections. 2 Right-click the network connection you want to configure and select Properties. 3 On the General tab (for a local area connection) or the Networking tab (for all other connections), select Internet Protocol (TCP/IP), and then click Properties. 4 Select Advanced WINS tab and click Add. 5 In the TCP/IP WINS server window, type the IP address of the WINS server and click Add. 6 To enable use of the Lmhosts file to resolve remote NetBIOS names, select Enable LMHOSTS lookup. 48 Guidelines for Configuring Your Network for iSCSI