Dell S2810dn Smart Dell Smart Printer Users Guide - Page 152
Purpose, Values, Power Saver, Power Saver Timer, Auto Reset
View all Dell S2810dn Smart manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Power Saver Timer CAUTION: If the Power Off Timer feature is set and the power is turned off, stored data in RAM Disk is cleared. Purpose: To specify the time for transition to power saver mode. Values: Sleep Deep Sleep Power Off Timer*1 10 minutes* Available Range: 1-60 minutes 10 minutes* Available Range: 1-60 minutes Auto Detect* 180 minutes* Available Range: 60-1440 minutes On 180 minutes* Available Range: 60-1440 minutes Specifies the time taken by the printer to enter Sleep mode after it finishes a job. Specifies the time taken by the printer to enter Deep Sleep mode after it has entered Sleep mode. Detects whether the printer is connected to a network via Ethernet or wireless. If the printer is connected to a network, Power Off Timer is disabled. If the printer is not connected to a network (connected via USB or Wi-Fi Direct), the printer automatically turns off after the specified time has elapsed. Specify the time it takes to automatically turn off the printer after it has entered Deep Sleep mode. Specifies the time it takes to automatically turn off the printer after it has entered Deep Sleep mode. Off Disables Power Off Timer. *1 Power Off Timer feature is available only in certain regions. When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an electrical circuit with room lighting and you notice lights flickering. Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a value between 1 and 60 minutes for the power saver mode if you want a balance between energy consumption and a shorter warm-up period. The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer. You can also change the status of the printer to the standby mode by pressing the (Power Saver) button on the operator panel. If the Power Off Timer feature turns off the printer, the printer cannot be turned back on automatically. To turn the printer back on, physically turn the power switch of the printer to On. Auto Reset Purpose: To automatically reset the settings to the default settings and return to the standby mode after you do not specify any settings for the specified time. 152 Understanding the Printer Menus