Denon AVR-1612 Owners Manual - Page 62

Basic version Advanced version Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup. • If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 54, 55). • "System Setup" can be used without changing the settings. Please set if necessary. Setting items Setting details Pre Assign NORMAL : Set for connecting the surround back speakers to the SURR. The signal output from BACK/FRONT HEIGHT connector in PRE OUT. the SURR.BACK/FRONT F.HEIGHT : Set for connecting the front height speakers to the SURR. HEIGHT terminals on PRE BACK/FRONT HEIGHT connector in PRE OUT. OUT of the amplifier can be switched in accordance with A power amplifier (sold separately) is required for this connection. the speaker environment. Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use a large speaker that can adequately play back low and size (bass reproduction frequencies. capability). • Small : Use a small speaker that has inadequate playback capacity for NOTE low frequencies. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center", "Surround", "S.Back" and Instead, use the frequencies "F.Height" can not be set to "Large". set in "Crossover Freq." Center : Set the presence and size of the center speaker. (vpage 61) as the • Large : Use a large speaker that can adequately play back low standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Setting items Speaker Config. (Continued) System Setup Setting details Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "S.Back" and "F.Height" can be set to "Large". • When "Surround" is set to "None", "S.Back" and "F.Height" are automatically set to "None". S.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2spkrs : Use two surround back speakers. • 1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "S.Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make "Surr.Parameter" - "S.Back" setting other than "OFF" (vpage 53). NOTE When "Pre Assign" setting (vpage 59) is "NORMAL", you can make the "S.Back" setting. vSee overleaf Information BD 59