Denon DRA 395 Owners Manual - Page 24
Initialization Of The Microprocessor, 11. Last Function Memory, Notes - reset
UPC - 081757504614
View all Denon DRA 395 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ENGLISH 10 INITIALIZATION OF THE MICROPROCESSOR When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the microprocessor is required by the following procedure. B 1 Switch off the unit and remove the AC cord from the wall outlet. 2 Hold the following SPEAKER A button and B button, and plug the AC cord into the outlet. SPEAKER A B 2 (Main unit) 3 Check that the entire display is flashing with an interval of about 1 second, and release your fingers from the 2 buttons and the microprocessor will be initialized. NOTES: • If step 3 does not work, start over from step 1. • If the microprocessor has been reset, all the button settings are reset to the default values (the values set upon shipment from the factory). 11 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off. • The unit also equipped with a back-up memory. This function provides approximately one day of memory storage when the main unit's power operation switch is off and with the power cord disconnected. 24