Dewalt DW715 Instruction Manual - Page 6
Unpacking Your Saw, Specifications - 12 in miter saw
View all Dewalt DW715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English Clamp: DW7082 Used for firmly clamping workpiece to the saw table for precision cutting. Dust Bag: DW7053 (Included with some models) Equipped with a zipper for easy emptying, the dust bag will capture the majority of the sawdust produced (not shown). NOTE: Deflector on dust spout channels debris to ground. Spout has a provision to attach a vacuum hose to collect sawdust. Lift dust spout to connect hose. Crown Molding Fence: DW7084 Used for precision cutting of crown molding. Kerf Plate Blank: DW7055 Used to limit back side tear out of material or as a replacement kerf plate. SAW BLADES: ALWAYS USE 12" SAW BLADES WITH 1" ARBOR HOLES. SPEED RATING MUST BE AT LEAST 4800 RPM. Never use a smaller diameter blade. It will not be guarded properly. BLADE DESCRIPTIONS APPLICATION MODEL # DIAMETER TEETH Construction Saw Blades (thin kerf with anti-stick rim) General Purpose DW3123 12" 32 Fine Crosscuts DW3126 12" 60 Fine Crosscuts DW3128 12" 80 Woodworking Saw Blades (provide smooth, clean cuts) Fine crosscuts DW7648 12" 60 Fine crosscuts DW7649 12" 80 Ultra-fine crosscuts DW7650 12" 96 Laminates DW7661 12" 80 Solid surface and plastics DW7668 12" 80 Non-ferrous metals DW7666 12" 80 TOOTH GRIND ATB ATB ATB ATB ATB ATB TCG Mod TCG TCG DW7080 END PLATE LOCKNUTS DW7082 Unpacking Your Saw Check the contents of your miter saw carton to make sure that you have received all parts. In addition to this instruction manual, the carton should contain: 1. One No. DW715 miter saw. 2. One DEWALT 12" (305mm) dia. saw blade 3. One blade wrench in wrench pocket shown in Figure 2. 4. One DW7053 dustbag (some models). Specifications CAPACITY OF CUT 50˚ miter left and right 48˚ bevel left, 3˚ bevel right 0˚ miter Max. Height 3.5" (89mm) Max. Width 7.7" (196mm) Result Width 6.5" (165mm) Result Height 2.6" (66mm) 45˚ bevel - Left Max. Height 2.3" (58mm) Max. Width 7.7" (196mm) 45˚ miter Max. Height 3.5" (89mm) Max. Width 5.5" (140mm) Result Width 4.7" (120mm) Result Height 2.6" (66mm) Result Width 6.7" (170mm) Result Height 1.7" (43mm) 4 DW7051 KNOBS DW7084 TOP HOLE (USE FOR DW716) BRACKET