EMC CX400 Installation Guide - Page 122

Linux Installation Checklist Task With Access Logix Without Access Logix Reference Document 5 Storage System ❑ If currently installed ❑ If currently installed Navisphere Manager Update software storage-system software is not at the required minimum revision, storage-system software is not at administrator's guide the required minimum revision, and online help update it. update it. CAUTION During the software update, hosts connected to the storage system will lose access to data if they do not have failover software or if all paths to an SP are down. CAUTION During the software update, hosts connected to the storage system will lose access to data if they do not have failover software or if all paths to an SP are down. 6 Server ❑ Cable the HBA ports to the switch ❑ Cable the HBA ports to the switch Storage-system setup Cable HBAs to switches or connected to the storage system or to SP ports. connected to the storage system guide. or to SP ports. storage system ❑ Checkpoint - For a SAN, verify ❑ Checkpoint - For a SAN, verify Switch documentation the HBA connections to the the HBA connections to the switch by checking the LED(s) for switch by checking the LED(s) for the switch port connected to each the switch port connected to each additional HBA port. additional HBA port. For a 1-Gbit switch - LED is green, which indicates that the HBA port is logged in to the switch port. For a 1-Gbit switch - LED is green, which indicates that the HBA port is logged in to the switch port. For a 2-Gbit switch - One of the following: • The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port. • For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port. • For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port. For a 2-Gbit switch - One of the Switch documentation following: • The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port. • For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port. • For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port. 3-14 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems