EMC CX400 Installation Guide - Page 46
Cable additional, or replacement, HBAs to switches, or storage, system cont., Zone
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
AIX Installation Checklists Task With Access Logix Without Access Logix Reference Document 11 Server Cable additional or replacement HBAs to switches or storage system (cont.) For a 2-Gbit switch - One of the following: • The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port. • For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port. • For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port. For a 2-Gbit switch - One of the following: • The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port. • For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port. • For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port. 12 Switches Zone for additional HBAs For a SAN ❑ Zone the switches to provide a path from each additional HBA port (host initiator) to the appropriate SPs. For a SAN ❑ Zone the switches to provide a path from each additional HBA port (host initiator) to the appropriate SPs. Switch management documentation ❑ Checkpoint - Use switch management software to verify the switch connections to the storage system. ❑ Checkpoint - Use switch management software to verify the switch connections to the storage system 13 Server ❑ Download the following command ❑ Download the following command AIX documentation Make target SPs available from ftp://ftp.emc.com/pub/elab/ powerpath/aix and execute it: from ftp://ftp.emc.com/pub/elab/ powerpath/aix and execute it: emc_cfgmgr.sh emc_cfgmgr.sh ❑ Checkpoint - Verify that AIX sees ❑ Checkpoint - Verify that AIX sees LUNZ devices with the following LUNZ devices with the following AIX command: AIX command: lscfg | grep LUNZ lscfg | grep LUNZ If AIX does not see LUNZ devices If AIX does not see LUNZ devices • Verify that arraycommpath is set to 1 as described in step 9. • Verify that arraycommpath is set to 1 as described in step 9. • Execute the following AIX command: emc_cfgmgr.sh • Execute the following AIX command: emc_cfgmgr.sh 1-36 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems