EMC CX400 Installation Guide - Page 96
Required Host Software Revisions, Prerequisites, EMC Support, Matrix, EMC Support Matrix
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
HP-UX Installation Checklist Required Host Software Revisions ◆ HP-UX operating system revision listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com) ◆ HBA driver revision listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com) ◆ VxVM 3.5 or higher Refer to the EMC Support Matrix and the EMC PowerPath for UNIX Release Notes on the Powerlink website (http://powerlink.emc.com) for the specific revision required for your HP-UX version. Prerequisites ◆ All switches must be installed. ◆ Storage systems must be set up, initialized (if required), and connected to switches, and any optional storage-system software (Access Logix, SnapView, MirrorView, MirrorView/A, SAN Copy) must be installed. ◆ Navisphere Manager must be installed. ◆ If any storage systems have SnapView, the admsnap utility must be installed on the servers that will be the SnapView production and secondary hosts. ◆ You must have a host that is • Running an operating system that can support the Navisphere Manager 6.X browser-based client. For an up-to-date list of such operating systems, refer to the Navisphere Manager 6.X release notes on http://powerlink.emc.com. • On a network that is connected to the storage-system servers and that will be connected to the SPs in the storage system. 2-46 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems