EMC CX400 Installation Guide - Page 256
Prepare SRM, Console for Boot LUN, Install Tru64 UNIX on, boot LUN, Zone additional paths
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Tru64 UNIX Installation Checklist Task With Access Logix Reference Document 6 Server ❑ At the SRM console, execute the init command. Host connectivity guide for Tru64 UNIX Prepare SRM and Tru64 UNIX documentation Console for Boot LUN ❑ Verify that the boot LUN is visible to the console with the following command: wwidmgr -show wwid ❑ Execute the following command: wwidmgr -quickset -udid udid-num where udid-num is the UDID number of the boot LUN. ❑ At the SRM console, execute the init command. ❑ Checkpoint - Verify that the boot LUN is visible with the following command: show device 7 Server ❑ Install Tru64 UNIX on the boot LUN. Install Tru64 UNIX on boot LUN ❑ Apply any required patches and driver updates. Host connectivity guide for Tru64 UNIX and Tru64 UNIX documentation ❑ Create an entry in /etc/ddr.dbase to provide support for CLARiiON LUNs. ❑ Shut down the server. 8 Switches ❑ Create the rest of the zones between the SPs and the Switch management documentation Zone additional paths appropriate HBAs on the server. 9 Storage System Update connection information ❑ Use Navisphere Manager to disconnect the server from Navisphere Manager administrator's the Storage Group containing the boot LUN. guide and online help ❑ Use Navisphere Manager to register the remaining connections for each HBA with the following Initiator Record properties: Property Initiator Type ArrayCommPath Failover Mode Unit Serial Number Value Compaq/Tru64 Selected 0 Array ❑ Reconnect the server to the Storage Group containing the boot LUN. 6-8 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems