EMC CX400 Installation Guide - Page 161
Required Host Software Revisions, Prerequisites, For CX300, CX500, CX700 storage systems
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
NetWare Installation Checklists Required Host Software Revisions ◆ NetWare operating system revision and kernel listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com) ◆ HBA driver revision listed in the EMC Support Matrix on the Powerlink website (http://powerlink.emc.com) ◆ NetWare PowerPath • For CX200, CX400, CX600, or FC4700-Series storage systems Version 3.0.0 with patch 3.0.1 or higher • For CX300, CX500, CX700 storage systems Version 3.0.1 or higher • For FC4500 storage systems Version 3.0.0 with patch 3.0.2 or higher Refer to the EMC Support Matrix and the EMC PowerPath Release Notes for UNIX on the Powerlink website (http://powerlink.emc.com) for the specific revision required for your NetWare version. Prerequisites ◆ You must have a host that is • Running an operating system that can support the Navisphere Manager 6.X browser-based client. For an up-to-date list of such operating systems, refer to the Navisphere Manager 6.X release notes on http://powerlink.emc.com. • On a network that is connected to the storage-system server and that you will connect to the SPs in a CX200, CX300, CX400, CX500, CX600, CX700, or FC4700-Series storage system. ◆ For most configurations, you must also have a host that is • Running Navisphere CLI version 6.X • On a network that is connected to the storage-system server and that you will connect to SPs in CX200, CX300, CX400, CX500, CX600, CX700, or FC4700-Series storage system. ◆ For an FC4500 storage system connected to a server on which you will install PowerPath, you must have a computer that you can connect to the storage system. This computer must run • Windows 2000 • Navisphere Host Agent and CLI version 6.1 or higher PowerPath Configurations for NetWare 4-3