EMC CX400 Installation Guide - Page 80

HP-UX Installation Checklist Task With Access Logix Reference Document 14 Server Make target SPs available (cont.) ❑ Reverify that HP-UX sees device entries for all LUNS with the following HP-UX command: ioscan -fnC disk HP-UX documentation 15 Storage System ❑ Use Navisphere Manager to set general storage-system properties. Configure Navisphere Manager administrator's guide and online help ❑ Use Navisphere Manager to create RAID Groups, bind LUNs, create Storage Groups, and assign LUNs to Storage Groups. ❑ Use Navisphere Manager to connect the server to a Storage Group. 16 Server Make LUNs visible ❑ Log in as root and restart the Navisphere Host Agent with the following HP-UX commands: /sbin/init.d/agent stop /sbin/init.d/agent start CX-Series Server Software for HP-UX Installation Guide ❑ Checkpoint - Verify that HP-UX can recognize these LUNs with the following HP-UX commands: ioscan -fnC disk insf -e If HP-UX does not recognize any LUNs, verify the connection to the Storage Group. HP-UX documentation ❑ Verify that HP-UX sees device entries for all LUNS with the following HP-UX command: ioscan -fnC disk HP-UX documentation 17 Storage System Set up Event Monitor ❑ Plan your monitoring configuration. Navisphere Manager administrator's guide ❑ Use Navisphere Manager to set user options, create templates, and set up and online help your monitoring configuration. 2-30 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems