EMC CX400 Installation Guide - Page 166
Install, Initialize and, install software, enablers, If you have SAN Copy, SnapView, MirrorView
View all EMC CX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
NetWare Installation Checklists Task With Access Logix Reference Document 6 Switches Install For a SAN ❑ Install switches, if not already installed. Rails, cabinet, and switch documentation ❑ Connect a cable from each host HBA port to a switch port. ❑ Checkpoint - Verify the HBA connection to the switch by checking the LED(s) for the switch port connected to the HBA port. For a 1-Gbit switch - LED is green, which indicates that the HBA is logged in to the switch port. For a 2-Gbit switch - One of the following: • The left LED is green and the right LED is off, which indicates that a 1-Gbit SP port is logged in to the switch port. • For a DS-xxB2 switch, both LEDs are green, which indicates that a 2-Gbit HBA port is logged in to the switch port. • For a DS-xxM2 switch, the left LED is blue and the right LED is off, which indicates that a 2-Gbit HBA port is logged in to the switch port. 7 Storage System ❑ Install the storage system in the cabinet, if not already installed. Install Rails and cabinet documentation 8 Storage System ❑ Install the Navisphere Initialization Utility on a host on the same subnet as Storage-system setup Initialize and the storage-system management ports. guide install software enablers ❑ Use the Navisphere Initialization Utility to initialize the storage system. ❑ If you have SAN Copy, SnapView, MirrorView, and/or MirrorView/A Navisphere Manager software, install their enablers. administrator's guide and online help 4-8 EMC Installation Roadmap for CX-Series and FC-Series Storage Systems