Edimax IC-3005 Manual - Page 114
Open Ports Required by IP CAM - port forwarding
View all Edimax IC-3005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
3. Enable Dynamic DNS function, select „DynDNS‟ as service provider, and fill the information you obtained from Dyndns.org into Domain name, Account, and Password field (these field‟s name may different on your router). 5.3.2 Open Ports Required by IP CAM To access IP CAM located behind router or firewall, you must open ports on router or firewall so you can access IP CAM from Internet. 1. Go to your router‟s setup page, and locate „NAT‟, „Firewall‟, „Port Mapping‟, „Port Forwarding‟, or similar setup item. 2. Enable this function, and fill IP CAM‟s IP address in „Private IP‟ (or similar field), select „TCP‟ or „BOTH‟ as data type, and input these port numbers for the services you wish to access from Internet: 114
114
3. Enable Dynamic DNS function, select
„
DynDNS
‟
as service provider, and fill
the information you obtained from Dyndns.org into Domain name, Account,
and Password field (these field‟
s name may different on your router).
5.3.2 Open Ports Required by IP CAM
To access IP CAM located behind router or firewall, you must open ports on
router or firewall so you can access IP CAM from Internet.
1. Go to your router
‟
s setup page, and locate
„
NAT
‟
,
„
Firewall
‟
,
„
Port Mapping
‟
,
„
Port Forwarding
‟
, or similar setup item.
2. Enable this function, and fill IP CAM
‟
s IP address in
„
Private IP
‟
(or similar
field), select
„
TCP
‟
or
„
BOTH
‟
as data type, and input these port numbers for
the services you wish to access from Internet: