Edimax IC-3005 Manual - Page 35

The descriptions of every setting in this menu will be given below: Item Self PinCode Configure via Push Button Description A random 8-digit code will be displayed here. If the wireless AP you wish to connect supports PINCODE, please input this code to the AP you wish to connect. This code changes every time you enter this page. If the wireless AP you wish to connect supports push button WPS configuration, click „Start PBC‟ and press the WPS button on the wireless AP to start pairing. Configure via PinCode Wireless Connection Network Type You can also press „WPS / Reset‟ button located at the back of IP camera for the same purpose. DO NOT press and hold „WPS / Reset‟ button for too long time, if you press and hold „WPS / Reset‟ button for more than 10 seconds, all settings in IP camera will be lost! If the wireless AP already generates a 8-digit code, please input the code here and click „Start PIN‟ button to start pairing. Select „Enable‟ to activate wireless network function of this IP camera, select „Disable‟ to disable it. Select the network type of wireless connection. Available options are „Infrastructure‟ (Connect the IP camera to a wireless access point), and „Adhoc‟ (This IP camera will become a stand-alone wireless network point, other wireless computers / devices can discover this IP camera and connect to it without wireless access point). Available Networks You can set to „Adhoc‟ when you don‟t have any wireless access point, but your computer has wireless network card. Set to „Infrastructure‟ when you have wireless access point, and you have computers with wired network connection. Here shows all wireless access points found by this IP camera. Please note not all access points will be displayed at the same time, if the access point you wish 35