Electrolux E30DF74TPS Installation Instructions English - Page 13

Level the Range

Page 13 highlights

30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS 7 Level the Range Level the range and set cooktop height before installation in the cut-out opening (if applicable). 3. Level the range, if necessary, by adjusting the 4 leg levelers with a wrench (Figure 21). 1. Install an oven rack in the center of the oven. 2. Place a level on the rack (Figure 20). Take 2 readings with the level placed diagonally in one direction and then the other. Base of Range Leveling leg Raise Lower Decorative Leg Screw Figure 20: Use the oven racks to level appliance Figure 21: Adjusting appliance height 4. Slide range into cut-out opening and double check for levelness. If the range is not level, pull unit out and readjust leveling legs, or make sure floor is level. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

13
30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
7
Level the Range
Level the range and set cooktop height before
installation in the cut-out opening (if applicable).
1.
Install an oven rack in the center of the oven.
2.
Place a level on the rack (Figure 20). Take 2
readings with the level placed diagonally in one
direction and then the other.
3.
Level the range, if necessary, by adjusting the 4 leg
levelers with a wrench (Figure 21).
4.
Slide range into cut-out opening and double check
for levelness. If the range is not level, pull unit out
and readjust leveling legs, or make sure floor is level.
Figure 20: Use the oven racks to level appliance
Figure 21: Adjusting appliance height
Leveling leg
Raise
Lower
Base of Range
Decorative
Leg Screw