Electrolux E30DF74TPS Installation Instructions English - Page 8
Power Supply Cord
View all Electrolux E30DF74TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS 3 Power Supply Cord Recommended Wall Outlet Installation Locations Suggested location of the wall outlet is shown in Figure 4 for 30" models and in Figure 5 for 36" models. The outlet may also be located in the lower left corner of the adjacent right cabinet, as shown in Figure 6 Center Line of Range 10" (25.4 cm) WALL 7" Max. (17.8 cm Max.) FLOOR Locate Electrical Hook-up Inside Shaded Area Center Line of Range Figure 4: 30" Models Outlet Location Electrical Shock Hazard -Do not attempt to install the appliance directly to a junction box, modify the factory-installed cord, or connect a different power cord to the appliance. If the wall outlet is not sufficient to support the requirements of this appliance, it is the responsibility of the consumer to have the appropriate outlet installed by an electrician. Improper installation and electrical connections can result in electric shock, damage to the appliance, personal injury, fire, or death. This appliance is equipped with a factory-connected, 4-wire power supply cord (Figure 7). This cord is rated at 240 volts, 40 amps, and temperature rated at 194°F (90°C). This cord is UL/CSA listed and has been tested and approved for use with this appliance. Center Line of Range 14" (35.6 cm) WALL 5" Max. (12.7 cm Max.) FLOOR Locate Electrical Hook-up Inside Shaded Area Center Line of Range Figure 5: 36" Models Outlet Location 8" (20.3 cm) 12" (30.5 cm) Figure 7: Factory connected power supply cord Appliance Rating* Power Supply Rating 120/240 Volts 120/208 Volts Amps 1-10 kW 0-7.6 kW 30 8.8-16.5 kW 7.8-12.5 kW 40 or 50 16.6-22.5 kW 12.6-18.5 kW 50 * The NEC calculated load is less than the total connected load listed on the serial plate. Figure 6: Adjacent Cabinet Outlet Location 8