Epson 740c User's Guide - Page 25
Using the Direct Power On Function, caution
UPC - 010343851214
View all Epson 740c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3. Press the PPower button again. The lamp is turned off and the Power light flashes orange for about 20 seconds as the projector cools down. After the projector has cooled, the projector beeps twice, the orange light stays on, and the exhaust fan shuts off. If you want to turn the projector on again, wait until the orange light stops flashing. Then press the PPower button. 4. If you extended the adjustable front foot, press up on the blue foot release lever to retract it. 5. Replace the lens cap and unplug the power cord. caution Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the projector's overall life. Using the Direct Power On Function The Direct Power On function enables faster setup. The projector will start up automatically when you plug it in; you won't have to press the PPower button. Follow these steps to enable Direct Power On: 1. Press the Menu button on the remote control and select the Extended menu. 2. Choose Operation and press Enter. 3. Choose Direct Power On and press Enter. note If a power outage occurs when Direct Power On is enabled and the projector is plugged in, the projector will start when the power is restored. 4. Highlight On and press Enter. 5. Press Esc or Menu to exit. The setting will take effect the next time you plug in the projector. Displaying and Adjusting the Image 25