Epson ActionLaser 1100 User Setup Information - Page 5
Unpacking
View all Epson ActionLaser 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2 Unpacking 1. Remove the accessories and printer from the shipping carton. 2. Set the printer on a flat, stable surface. Leave adequate room to provide ventilation. Allow approximately 9 inches (230 mm) above the printer to be able to fully extend the paper trays and load paper. 3. Take the packaging off the printer and the other items and store for future use. Note: The printer weighs about 11 lb (5 kg) and should be lifted with care. 4. Open the paper and exit trays at the top of the printer and remove the shipping spacer from the center of the feeder. 5. Close the paper and exit trays. 2 Setup
2
Unpacking
1.
Remove the accessories and printer from the shipping carton.
2.
Set the printer on a flat, stable surface. Leave adequate room
to provide ventilation. Allow approximately 9 inches
(230 mm) above the printer to be able to fully extend the
paper trays and load paper.
3.
Take the packaging off the printer and the other items and
store for future use.
Note:
The printer weighs about 11 lb (5 kg) and should be lifted with
care.
4.
Open the paper and exit trays at the top of the printer and
remove the shipping spacer from the center of the feeder.
5.
Close the paper and exit trays.
2
Setup