Epson Apex 386SX/16 Canadian Product User Manual - Page 47
W1-W6, Onboard,
View all Epson Apex 386SX/16 Canadian Product manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
The following shows the configuration for total onboard system memory. Description Using one bank or two banks (banks 0 & 1) with either DIP or SIMM DRAMS as onboard memory W1 - W6 Settings Using three or four banks of DIP (banks 0, 1) and SIMM (banks 2, 3) DRAMS as onboard memory Table 2-2: Settings of Jumper W1-W6 Before setting up RAM configuration in BIOS, you must refer to the following table to set the wait state and the page-interleave mode. Particularly, you cannot set both 0 wait state and disabled pageinterleave mode in Turbo mode; otherwise your system cannot operate normally, even cannot display the screen. In order to set both modes normally, you should switch the button from Turbo mode to Normal mode. RAM access time is 1OOns. Table 2-3 : Total Onboard System Memory Size. Chapter 2: Setting Up Your System 9