Epson BrightLink 585Wi Installation Guide - Page 11
English, After confirming your image size, use tape or a pencil to mark the distance c
View all Epson BrightLink 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English 10 in. (254 mm) -height of wall plate plus cover Required distance from top of image area to bottom holes of wall plate (c) Distance from ceiling to top of image area (d) Ceiling height Height of image area (h) Diagonal image size (S) Width of image area (w) Distance from floor to bottom of image area (f) 8. After confirming your image size, use tape or a pencil to mark the distance (c) from the top of the image area on the board to the bottom of the wall plate. 9. Align the line (horizontal) on the template sheet with the (c) mark, then align the center line on the template sheet with the center of the image area. Follow the instructions on page 23 to install the projector. The tables on the following pages provide installation information for all supported image sizes. The minimum ceiling height is based on an image 30 inches from the floor; if the image is lower, the minimum ceiling height is reduced by the corresponding measurement. Use the worksheets, the illustrations, and the information in the tables on the following pages to determine the projection distance and placement of the wall plate. The recommended range for projection distance (a) as shown on the following pages is 2.5 to 12.2 inches (62 to 311 mm). 11