Epson BrightLink 585Wi Installation Guide - Page 32

Warning, Attach the projector to the wall mount

Get Epson BrightLink 585Wi PDF manuals and user guides View all Epson BrightLink 585Wi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

H Attach the projector to the wall mount 1. Loosen the two screws with a Phillips head screwdriver and remove the cable cover from the projector. Screws (x2) Cable cover 2. Insert the slide plate into the wall mount from the interface side of the projector ( ). Align the 3-axis adjustment unit with the slide plate's alignment mark ( ). 3. Tighten the M4 x 12 mm hexagon socket head cap bolts (x2) ( ). Slide plate Projector interface side Bolt positions Washer Spring washer M4 x 12 mm hexagon socket head cap bolts Alignment marks Warning When installing or adjusting the wall mount, do not use adhesives to prevent the screws from loosening and do not use lubricants or oils on the projector slide plate. This may cause the case to crack and the projector to fall, resulting in personal injury or property damage. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
32
H
Attach the projector to the wall mount
1.
Loosen the two screws with a Phillips head screwdriver and remove the cable cover from the projector.
2.
Insert the slide plate into the wall mount from the interface side of the projector (
).
Align the 3-axis adjustment unit with the slide plate’s alignment mark (
).
3.
Tighten the M4 x 12 mm hexagon socket head cap bolts (x2) (
).
Cable cover
Screws (x2)
Projector
interface side
Alignment marks
Slide plate
M4 x 12 mm hexagon socket head cap bolts
Spring washer
Washer
Bolt positions
When installing or adjusting the wall mount, do not use adhesives to prevent the screws from
loosening and do not use lubricants or oils on the projector slide plate.
This may cause the
case to crack and the projector to fall, resulting in personal injury or property damage.
Warning