Epson BrightLink 585Wi Installation Guide - Page 39

Adjust the vertical slide, Turn off the display of the test pattern

Page 39 highlights

English J Adjust the vertical slide 1. Loosen the M6 x 20 mm hexagon shoulder bolt ( ). 2. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal shaft at the top of the wall mount ( ). Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it. Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it. Hexagonal shaft M6 x 20 mm hexagon shoulder bolt M8 hexagon bolt 3. Tighten the M6 x 20 mm hexagon shoulder bolt you loosened in the first step ( ). K Turn off the display of the test pattern Press the [Esc] button on the remote control or control panel to turn off the test pattern. Warning Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

39
English
J
Adjust the vertical slide
1.
Loosen the M6 x 20 mm hexagon shoulder bolt (
).
2.
Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal
shaft at the top of the wall mount (
).
Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it.
Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it.
3.
Tighten the M6 x 20 mm hexagon shoulder bolt you loosened in the first step (
).
K
Turn off the display of the test pattern
Press the [Esc] button on the remote control or control panel to turn off the test pattern.
Hexagonal shaft
M8 hexagon
bolt
M6 x 20 mm hexagon shoulder bolt
Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal
injury or property damage.
Warning