Epson BrightLink 695Wi Installation Guide - Control Pad and Touch Unit - Page 7
Package Contents
View all Epson BrightLink 695Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 Package Contents Touch Unit The following parts are packaged with your projector and are necessary when attaching the Touch Unit. When installing the Touch Unit on a non-magnetic screen or whiteboard, you will also need three M4 screws. Marker (x2) Touch Unit Spacer for screw hole (×3) Touch Unit connection cable Label (×4) Tape (approx. 2.4 inches [6 cm]) for securing the markers (×12) Infrared deflector (approx. 11.2 inches [28.5 cm]) (×8) Touch Unit Bracket The following parts are packaged with your projector and are necessary when attaching the Touch Unit above the frame of a whiteboard. When installing the installation plate, you will also need three (3) M4 wood screws or M4 anchor bolts (not included). Installation plate Securing plate M4 × 12 mm hexagon socket head cap bolt (×2) M4 × 25 mm hexagon socket head cap bolt (×2) M4 × 55 mm and M4 × 70 mm hexagon socket head cap bolts 6